will my engine handle it

[torino 1971]

Looking to run a 150 shot cheater on my car. Stock windsor block bored.30 over with trw domed forged pistons. Stock crank cut .010 knife edged and nitrated. Solid cam dont have specs with me. Fully ported j 302 heads . Work done By kenetics racing. thanks for your input

 

[Casper302]

As long as you get the tune right it will last no problems. Windsors are strong.

 

[bottlefed93]

should be just fine with the right tune

 

[allthrottle]

Looking to run a 150 shot cheater on my car. Stock windsor block bored.30 over with trw domed forged pistons. Stock crank cut .010 knife edged and nitrated. Solid cam dont have specs with me. Fully ported j 302 heads . Work done By kenetics racing. thanks for your input

I've run 150 shot on a stock long block 302 w/ 100k+ miles and those are much weaker.

 

[Pure84GTT]

utilizing it and handling it are two different things all together, but im sure it wont break anything.

 

[jordanbmx]

Your good! just make sure your fuel pump is enough to feed the motor and nitrous, if not, your going to have to build a seperate fuel system for the nitrous side. make sure enough timing is pulled out and the full supply is sufficient and you're golden!

 

[DaryWilson]

just 150? hell just hit it with 400 er so and let it ride hahahah

 

[jordanbmx]

^^^ nigga your crazy lmfao!

 

[AutoRoc]

Nothing wrong with starting with a 50 shot, then 100... and so forth..

I think its kind of fun to see what the gains are. The first 100hp is the most effective.

My tiny 305 engine picked up like 19mph with 100hp and only another 2 mph with the extra 50hp on top of that.. it only went 87mph on motor so you can do the math.... haha

 

[POPPAJ]

Check with the builder who did your motor.

 

[2094you]

pffffft i have ran 375 to a pretty much sock 302 block for 3 summers then it split the block in half
100-150 is nothing u can purge that through the motor i have