White 98' Trans Am "Rediversary" Roller, Lots of Good Parts!

Superman09

Club Member
Up for sale is my Rediversary Trans Am in roller form. It was being set-up to be a dedicated drag car, but I have decided to halt the project and spend the money else where.

Vehicle's current form:
-No engine, trans included
-No turbo components included other than FMIC mounted up front
-Battery not included
-10 bolt with 3.23's installed (car's factory rear end)
-Dual 255 pumps in the tank (tank was removed for install)
-All rest of factory fuel system in tact up into the engine bay
-factory computer and wiring harness included
-dash was removed and heater core + Pass Airbag removed
-HVAC Block off plate installed
-All interior is complete less seats (no seats included)
-Entire exterior and engine bay just professionally painted in GM Arctic White
-Stock Driveshaft Included
-No exhaust included
-No radiator installed

Aftermarket Parts installed on vehicle:
-PARacing Super Turbo K-member
-PARacing Tubular Lower A-Arms
-PARacing Tubular Upper A-arms
-Strange SA Front Coil Overs
-QA1 SA Rear shocks
-Eibach Pro-Kit rear springs
-PARacing Body Mounted Tq. Arm
-Founders LCAs
-Founders PHR
-Unsure of brand, bolt in LCA Relocation Brackets
-Unsure of brand, 3-point bolt in SFCs
-Custom narrowed front WS6 wheels with fresh 185/55/17 M&H tires
-WS6 wheels on rear with fresh 275/40/17 MT DR's
-Front mount intercooler installed up front
-Eboost Street Installed where HVAC used to be, solenoid mounted under engine bay
-Vacuum Log mounted in engine bay
-Catch can for boosted PCV system installed up near front bumper
-B&M Trans Cooler installed up front behind FMIC with braided -6an lines ran back to trans area
-GM WS6 Hood in Factory GM Arctic White Paint installed, Factory TA Hood with Fresh Arctic White painted included if buyer wants!
-Wheels have a transparent red finish on them, and red/silver anniversary style stripes installed replicating an anniversary car in "red".


$3750 with Factory hood only, you supply your wheels and tires
+$700 to keep WS6 hood on it
+$800 to keep wheels and tires on it

Vehicle located in Port Huron, MI.

Buyer must arrange pick-up.

PM if interested to negotiate vehicle in a form that fits what you want! :cheers:


DSC03502.jpg


DSC03499.jpg


DSC03468.jpg


DSC03467.jpg


DSC03462.jpg


DSC03463.jpg


DSC03466.jpg


DSC03465.jpg


3C3E3194-F56D-4BF3-8FE8-068D6B4A65F9-2523-00000834025AD7B8.jpg


45CD9664-7DAA-4A68-89E6-7EC1E07A29EA-2102-00000316EC81DEF4_zpse16a00b5.jpg


2DA9DD72-F226-41B6-A6B4-9A4B953DC03E-6160-000008A186115A22.jpg


92F582E0-47A2-4BDB-92F0-217A3FFB7FFE-6160-000008A194086CF1.jpg


92F582E0-47A2-4BDB-92F0-217A3FFB7FFE-6160-000008A194086CF1.jpg


A377A7D7-5B05-4701-910C-7EB1FC673357-4571-000006E0948F7C64.jpg


7B6EA4A4-2090-415F-B9B6-8A636F97D4B1-2401-0000031EFA1B6B15.jpg


FC5A340D-DF67-454F-BBC9-69F2F306967D-2401-0000031EFDDAC5E6.jpg


92E80996-4E6C-42AC-A423-B6E0355FA50A-10953-00000E36624661A1.jpg
 
Last edited:
Thanks, after much thought, I think I will be selling off some of the real big items and finishing this off just a little tamer than I had planned ;)
 
Yes, sorry for missing this, I am keeping it for now. Will be getting it back together with the LS1 that came out of it, built/stalled A4, and one of our turbo kits
 
Well, since you had it advertised as a roller, I was thinking that meant no engine or trans. The OP said "Vehicle in its current form: No engine, trans included." But I saw your other thread on mifbody, so I'm less confused now haha
 
Back
Top