Where to find a 41mm socket ?

COBRA90GT

COBRA90GT

Forum Member
Need to remove the triple tree nut on my bike and can't find a 41mm socket for a 1/2" drive. The largest socket I have is a 32mm - doh!

Anyone know where to find a 41mm that isn't 3/4" or 1" drive? Or better yet, borrow one from someone on the eastside? I'd leave a cash deposit, no worries.

Thx.
 
I have a 3/4 to 1/2 adapter that I picked up at Kitt's in Farmington. Would that help you? Then you can use the 1/2" ratchet.
 
If harbor freight doesn't have what you need, Wholesale Tool on Stephens, just east of Hoover will likely have what you need.
 
LilJuicedCoupe said:
What kind of bike?
Click to expand...

RC51

Scooter70 said:
I have a 3/4 to 1/2 adapter that I picked up at Kitt's in Farmington. Would that help you? Then you can use the 1/2" ratchet.
Click to expand...

Appreciate the offer.

1SLODAK said:
use these....

http://www.harborfreight.com/3-piece-impact-socket-adapter-set-67936.html
Click to expand...

Hmmm, that might work.

LT1Pat said:
I have a 1/2 to 3/4 drive and a 1-5/8 socket if you want to use those.
Click to expand...

Thanks.


Appreciate the help gang, think I'll try using a 1/2" to 3/4" adapter for the job.


Thought of another question though - If I use that adapter to re-tighten the triple tree nut with my torque wrench, will the reading be off by a large amount due to all of the play or "slop" in between the pieces (iet - ratchet, adapter, socket)?

Thx.
 
COBRA90GT said:
Thought of another question though - If I use that adapter to re-tighten the triple tree nut with my torque wrench, will the reading be off by a large amount due to all of the play or "slop" in between the pieces (iet - ratchet, adapter, socket)?

Thx.
Click to expand...

Nope, won't hurt the torque reading.
 
You must log in or register to reply here.
Back
Top