WANTED..RANGER RIMS/TIRES

[Detroit Gearbox]

I have a 2001 ranger (work truck) 2 wl drive that needs rims & tires. 5 lug 14/15 inch, steel or alum are ok. The center hole in the rim must be aprox 2 3/4" .
Eailer ranger rims will not work...hole is too small.
Current rims are 14 inch but will take 15's.

not looking for hooptie rims....its just a company's work truck.
drop me a pm or call my shop 586-777-4444-rich bewick

 

[Detroit Gearbox]

ttt

 

[347convert]

http://detroit.craigslist.org/pts/467479352.html

 

[Detroit Gearbox]

http://detroit.craigslist.org/pts/467479352.html

thanks for the link 347convert....but the early one's like that will not fit....I tried....hub on the rear axle is a larger dia.

 

[347convert]

Cough Cough Hole saw. If I see anything else I'll link it up.

 

[93Coupe]

i have a set
they are off of an 05 ranger. they are 16's though. have brand new tires.

 

[Jenga]

I have a set of wheels and tires from a 93 explorer with really good tires I would like 125.00 for everything and i will mount and balance them. They are 235-75-15 wild country tires with aluminum 5 spoke wheels. Or you can buy just the tires.

 

[Detroit Gearbox]

91 coupe and Jenga, the 93s will not fit if they are factory, one again the hole is too small, the 95,s may fit but 16's may be a bit large for the wheel well...how much? ....and do your travels take you into detroit at all?

 

[Detroit Gearbox]

Cough Cough Hole saw. If I see anything else I'll link it up.

thanks...Ive been checking craigslist too....and even ran a wanted ad.
lots of early ones available...

 

[Jenga]

91 coupe and Jenga, the 93s will not fit if they are factory, one again the hole is too small, the 95,s may fit but 16's may be a bit large for the wheel well...how much? ....and do your travels take you into detroit at all?

rotozip to fit the hub. If you use aluminum it will be easy.

 

[Detroit Gearbox]

its about 1/2" smaller.....and its a customers truck, so Im not going to hog it out to make something fit....or hole saw it.

 

[boosted gt]

i have a nice set of steel wheels from a 1998 jeep cherokee that i will sell for $60 i'm not positive they will work though. maybe a junkyard would know?

 

[93Coupe]

I would go to Detroit to make the sale. I have a 96 Ranger and they wont fit because of the old style front hubs that are on mine. (Its a 4X4.) Here are some pics.

 

[93Coupe]

I will include the center caps and lug nuts also. I am asking $400.

 

[347convert]

http://detroit.craigslist.org/pts/483014510.html

will those fit. I could also powder coat wheels if you get a deal on a beat up set, if your interested.

http://detroit.craigslist.org/pts/482771317.html