Looking for an older style Autometer mounting bracket (the strap that holds the guage in the hole) for a pressure gauge with a center tap. An new metal mounting bracket blocks the pressure tap, the new plastic brackets are too long.
The picture below show the old style gauge on the left, and a newer style pressure gauge on the right. The old gauge is also slightly shorter, 1-3/8 compared to 1-1/2" for the newer gauge can.
The picture below show the old style gauge on the left, and a newer style pressure gauge on the right. The old gauge is also slightly shorter, 1-3/8 compared to 1-1/2" for the newer gauge can.
