StangNut86
Club Member
My garage is cluttered with this stuff, some of it is worthless as scrap and the rest is too little to bother with a scrap run.
two gutted doors... need a little body work here and there but they're solid. good for a race car on a diet... regulators and whatnot have been removed. free, take em off my hands.
complete rear drum brake setup, stock from an 89 5.0 mustang. both drums, backing plates, hardware, even 4-lug axle shafts. also free.
mostly complete rear disk setup from a lincoln mark 7. axle brackets and caliper brackets, which are the biggest pains to find. i had to get rid of the calipers and the rotors were junk. this is a good setup for a fox mustang disk conversion where a parking brake is not needed, because the mechanism interferes with the shocks. 20 bucks.
Front facia from an 85 or 86 mustang. lx style (no foglights). header panel is with it. make an offer
rear facia from the same years. both covers have no rips. again make an offer.
all 4 of the bolt-on corner moldings for the same years. a little dirty and could use some tlc, 20 bucks for the set.
one pair of the body side moldings that fit on the doors of the same years. a little wavy, can probably be saved easily by removing the metal strips with a little heat and patience. make an offer...
i really don't wanna throw this stuff away, flexible on prices.
two gutted doors... need a little body work here and there but they're solid. good for a race car on a diet... regulators and whatnot have been removed. free, take em off my hands.
complete rear drum brake setup, stock from an 89 5.0 mustang. both drums, backing plates, hardware, even 4-lug axle shafts. also free.
mostly complete rear disk setup from a lincoln mark 7. axle brackets and caliper brackets, which are the biggest pains to find. i had to get rid of the calipers and the rotors were junk. this is a good setup for a fox mustang disk conversion where a parking brake is not needed, because the mechanism interferes with the shocks. 20 bucks.
Front facia from an 85 or 86 mustang. lx style (no foglights). header panel is with it. make an offer
rear facia from the same years. both covers have no rips. again make an offer.
all 4 of the bolt-on corner moldings for the same years. a little dirty and could use some tlc, 20 bucks for the set.
one pair of the body side moldings that fit on the doors of the same years. a little wavy, can probably be saved easily by removing the metal strips with a little heat and patience. make an offer...
i really don't wanna throw this stuff away, flexible on prices.
