team_southside
Club Member
Complete Package to run mid 8's
I am going to a turbo combonation and I am selling my engine engine carb to pan with nitrous system included. All parts have only 20 passes. Ready to drop in your car and run 8's. Motor is extemely reliable and runs consistant. Ultimate bang for your buck package for someone who is wanted to go fast. Asking $6500obo for the complete package. Need this gone asap.
810-300-7639 Nick
[email protected]
-383ci, 4 bolt high nickel block, pinned/studded mains.
-3.75" stroke Scat 4340 ultra light crank
-6.00" Scat 4340 Pro comp rods
-Mahle high dome pistons 13.5 to 1
-all arp fasteners
-Moroso Hi vol. oil pump
-Pro Topline Pro Lightning heads CNC ported by ET performance, angle milled to 20 degree 2.125 Del West Ti intake valves, 1.6 Del West Ti exhaust valves, titanium retainers, comp springs.
-Cometic MLS Head Gaskets
-Edelbrock super victor manifold ported and matched to heads by ET performance, Dominator flange conversion done by Modern Cylinder head.
-Comp Solid Roller camshaft
-Comp Tie bar lifters
-Jesel Belt Drive
-Jesel shaft mount rockers
-MSD Pro Billet distributor
-MSD Race wires
-Pro-Systems 1050cfm dominator custom buiilt to motor specs.
-Pro comp elect water pump
-GZ motorsports sportsman Vaccuum pump system
-NOS Bigshot plate nitrous system
-Aluminum KTS Racecars motor plate and midplate.
Custom 2" headers for mustang also available.
I am going to a turbo combonation and I am selling my engine engine carb to pan with nitrous system included. All parts have only 20 passes. Ready to drop in your car and run 8's. Motor is extemely reliable and runs consistant. Ultimate bang for your buck package for someone who is wanted to go fast. Asking $6500obo for the complete package. Need this gone asap.
810-300-7639 Nick
[email protected]
-383ci, 4 bolt high nickel block, pinned/studded mains.
-3.75" stroke Scat 4340 ultra light crank
-6.00" Scat 4340 Pro comp rods
-Mahle high dome pistons 13.5 to 1
-all arp fasteners
-Moroso Hi vol. oil pump
-Pro Topline Pro Lightning heads CNC ported by ET performance, angle milled to 20 degree 2.125 Del West Ti intake valves, 1.6 Del West Ti exhaust valves, titanium retainers, comp springs.
-Cometic MLS Head Gaskets
-Edelbrock super victor manifold ported and matched to heads by ET performance, Dominator flange conversion done by Modern Cylinder head.
-Comp Solid Roller camshaft
-Comp Tie bar lifters
-Jesel Belt Drive
-Jesel shaft mount rockers
-MSD Pro Billet distributor
-MSD Race wires
-Pro-Systems 1050cfm dominator custom buiilt to motor specs.
-Pro comp elect water pump
-GZ motorsports sportsman Vaccuum pump system
-NOS Bigshot plate nitrous system
-Aluminum KTS Racecars motor plate and midplate.
Custom 2" headers for mustang also available.
Attachments
Last edited:
