Tubing bender.

[afolk83]

Is there anyone that is within a reasonable drive from rochester that could bend a 1" dom round tube for me, it's 1/8" wall. I just need two 90degree bends made. I have the tube and am willing to pay. Or if u know of a shop that may do it on the spot. Thanks.

 

[DeFormula]

Let me know if you find one close. I'm in your neighborhood and may need some custom pipe work soon.

 

[DRAG-ULA]

Rieters metalcraft should be able to do it. (Mt Clemens)

 

[moneypit]

I cant bend 1 inch but if you need larger let me know I dont have dies below 2 inch

 

[DeFormula]

I cant bend 1 inch but if you need larger let me know I dont have dies below 2 inch

Thanks Ken, good to know...

 

[afolk83]

I will need 2" and bigger at some point so thanks. If I don't find something sooner I will call Rieters Metalcraft this week. Just trying to make a lower radiator support and 1" is perfect. Thanks again

 

[moneypit]

bending 2 inch 1/4 at 90 degress is pretty much impossible the weld will split

 

[DarkoStoj]

bending 2 inch 1/4 at 90 degress is pretty much impossible the weld will split

do you still have that bender you were selling from a while back?

 

[moneypit]

do you still have that bender you were selling from a while back?

yes but its in Wisconson now,