Trans Install Problem.

82hatch

82hatch

Club Member
Trying to install my c4 back behind my 351w in my '82. Onnce I get a couple bolts tight I can't turn the motor over w/ a socket-it won' turn at all. Only thing I can think of is converter isn't fully seated. Just had some work done on the trans and was having the ssame problem. Trans came fro ma 1980 stang w/ a 289. Seems to bolt up/line up fine, but once tightened down-that's it. I swear i'm gonna burn this damn car to the ground if I can't get this fixed. Never had so much problems putting a c4 back in. :mad:
 
allthrottle said:
Does the verter click 3 times when installing? Converter bolts hitting on anything?
Click to expand...

I can spin it with the bolts loose. Converter bolts/studs don't look to be hitting anything. I'm going to check the converter and make sure it clicked three times. Ughh Anyone want some beer to help? :lol: Damn close to paying someone to put it in! :lol:
 
Does the verter spin on the trans when on the ground? And I would try to spin it while it is up there before you put the studs/bolts through the verter and fp.

I could give ya hand 810-824-1495 LMK
 
allthrottle said:
Does the verter spin on the trans when on the ground? And I would try to spin it while it is up there before you put the studs/bolts through the verter and fp.

I could give ya hand 810-824-1495 LMK
Click to expand...

Yeah converter spun on the trans before I put it in. Maybe it slipped off. I'll probably call ya tomorrow or Thursday.
 
You must log in or register to reply here.
Back
Top