Strange c-clip eliminator question

[MustangRacer]

Has anyone installed/used these? I bought a used pair of strange 33 splines with c-clip eliminators. I've tried to find installation instructions online, but could not. Just wanting to know if u cut the housing ends flush or if you leave 1/8" like the mosers.

 

[chevelledave]

leave an 1/8 there should be a locator groove ...it centers the C-Clip housing on the rear end

 

[MustangRacer]

Has anyone installed/used these? I bought a used pair of strange 33 splines with c-clip eliminators. I've tried to find installation instructions online, but could not. Just wanting to know if u cut the housing ends flush or if you leave 1/8" like the mosers.

I forgot to mention, these are the street/strip version (price was right) with tapered roller bearings

 

[Billydroveit]

What he said...but strange uses a stud IIRC which also helps with location. Cut them and leave the eigth, there's a receiver groove in them.

 

[MustangRacer]

What he said...but strange uses a stud IIRC which also helps with location. Cut them and leave the eigth, there's a receiver groove in them.

I actually called Strange's tech line and the guy e-mailed me the directions. The ends actuall get cut off flush, as in up to the 1/16" lip for locating the backing plates. just an FYI if anyone comes across this in the future

 

[Billydroveit]

I actually called Strange's tech line and the guy e-mailed me the directions. The ends actuall get cut off flush, as in up to the 1/16" lip for locating the backing plates. just an FYI if anyone comes across this in the future

THanks for the info...i think i cut my lip down to almost nothing...i wasn't worried about it since they use a stud with a nice shoulder to locate them. I think they're a better piece than teh mosers, and easier to install.