Slicks and ford stuff

[notched88]

26x10.5 et drags 10 to 12 passes $100, 157th 50 oz 10.5 bolt ptrn tci flexplate nib $40, Trw forged flattop pistons(4-reliefs) stock rods good bolts $175, stock c-6 worked well when pulled $75. located in clinton twsp

 

[mystang]

what's the bore size on the pistons?

 

[notched88]

Sorry , pistons are 30 over.

 

[notched88]

The part no on pistons is L- 2482

 

[notched88]

ttt

 

[SVTSINR]

pm sent

 

[notched88]

pm sent

pm returned

 

[notched88]

ttt

 

[KC90GT]

What kind of rings are on those pistons? How much wear was put on those pistons? Any pics? What size valves will they allow for? Thanks.

 

[mark468]

he works afternons, not sure of the brand of rings but the pistons dont have but 30-40 miles and thats on the high side

 

[soap]

26x10.5 et drags 10 to 12 passes $100

MT doesn't make a 26x10.5 :dontknow:

Are they 26x10x15 or 28x10.5x15?? I also sent you a PM.

--Joe

 

[notched88]

What kind of rings are on those pistons? How much wear was put on those pistons? Any pics? What size valves will they allow for? Thanks.

I honestly dont remember what brand rings, they only have 25 miles at most on them. I had twisted wedge with 202 160s and didnt have any clearance issues.

 

[mark468]

I honestly dont remember what brand rings, they only have 25 miles at most on them. I had twisted wedge with 202 160s and didnt have any clearance issues.

what our doing home slacker

 

[notched88]

flexplate sold

 

[notched88]

Slicks are sold