Cbacarella
New member
THIS IS NOT MY CAR. I found it while scrolling around xceedspeed and thought id pass along the info in case any of you guys were interested.
Link to thread on xceedspeed....
http://www.xceedspeed.com/forums/showthread.php?t=139293
Link to thread on xceedspeed....
http://www.xceedspeed.com/forums/showthread.php?t=139293
.Chris.Year/Make/Model: 1989 toyota supra/ls1 turbo
Location: sterling heights
Price: 6300 obo
Mileage: na
-------------
1989 toyota supra targa project ls1 single turbo 99% done!!!
MODS:
FULL INTERCOOLER KIT WITH CUSTOM IC PIPES
GREDDY TYPE S BLOWOFF VALVE
AFTER MARKET 14IN 2600 CFM ELECTRIC FAN
KOYO POLISH PERFORMANCE RADIATOR
MKIV APEXI GT SPEC 3 ¾ EXHAUST
WALBRO 255 PUMP
GREDDY PROFEC B SPEC2(BLACK)
GREDDY ELECTRONIC BOOST GAUGE WITH MEMORY
GREDDY EGT GAUGE
HKS SAFR FUEL CONTROLLER
BLITZ TURBO TIMER
RED TOP OPTIMA BATTERY
ALPINE HEAD UNIT AND SPEAKERS
EIBACH SPRINGS W/ TOKICO BLUES
CROSS DRILLED FRONT ROTORS
AEROMOTIVE FUEL PRESSURE REGULATOR STEEL BRAIDED LINES AND GAUGE
STEEL BRAIDED FUEL DAMPER LINE
STEEL BRAIDED PS LINES
BOMEX REPLICA FRONT LIP(CURRENTLY NOT ON CAR BUT CAN BE INCLUDED)
1998 LS1 WITH ~60 K MILES
1998 4L60 E WITH ~60 K MILES
COMPLETE CUSTOM TURBO KIT BUILT BY AUTO ADDICTIONS IN ROCHESTER.
TURBO IS A CUSTOM T70 WAS PUT TOGETHER BY TURBO CONCEPTS
SWAPPED LS1-WITH CUSTOM MOTOR MOUNTS
CUSTOM DRIVE SHAFT LS1 TO SUPRA REAR END
CUSTOM STAINLESS TURBO MANIFOLDS FOR LS1
HEAT SHIELDS FOR MANIFOLDS
3” STAINLESS V BAND CLAMPS
2.5” FLEX CROSSOVER PIPE
HEAT WRAP FOR HEADERS AND CROSSOVER PIPE
BATTERY BOX AND WIRING FOR BATTERY RELOCATION
CUSTOM DOWNPIPE TO EXISTING 3/3/4 APEXI CATBACK
2 WIRE COOLANT SENSOR
CUSTOM TRANS CROSSMEMBER
CUSTOM MSD PLUG WIRE KIT WITH NGK PLUGS
CUSTOM INTERCOOLER PIPING AND FRONT MOUNT AIR TO AIR INTERCOOLER
STAINLESS VACUUM BLOCK
CHEVY OBD 2 PORT
BRAND NEW PAINLESS WIRING HARNESS (9
2 99 ECU’S INCLUDED
POLISHED ALUMINUM WHEELS 5 SPOKE DEEP DISH WITH NEWER TIRES, 17X11 REAR, 17X9 FRONTS
CUSTOM FABRICATED DASHBOARD WITH FULL AUTOMETER GAUGES.
All the car needs is a transcooler, radiator, and an ecu to be hooked up! Open to offers asking 11,500 have all reciepts for labor done along with anything I may have missed. To come take a look at the car call Joe at 586-738-8885
