sbf oiling issue

[bottlefed93]

Iam having a oiling issue with my sbf (dart shp block). When i prime it i get oil out of the three back rockers and that is it! any ides?

 

[dave89iroc]

do you turn it a 1/4 turn after you get oil from those rockers?

 

[bottlefed93]

Not sure what you mean? But i do index the motor when priming

 

[dave89iroc]

spin up the primer(drill I assume?) for a minute, turn the crank 1/4 turn, keep spinning the primer,and do this till you turn hte engine over all the way, you should get oil out of pretty much every pushrod(might have more flow out of some, but all should get oil)

 

[bottlefed93]

spin up the primer(drill I assume?) for a minute, turn the crank 1/4 turn, keep spinning the primer,and do this till you turn hte engine over all the way, you should get oil out of pretty much every pushrod(might have more flow out of some, but all should get oil)

ya i have done that.