SBF heads

[mystang]

Willing to look at anything other than stock. I do prefer aluminum heads, but a nice set of iron heads will work too.:icon_mrgr

 

[outlaw50]

i have a set of w jr's with 1.6 roller rockers 350.00

 

[mystang]

Ready to bolt on?

 

[86 jewel]

I have set of ported (not profess.) windsor sr. I have setup for solid roller or hydrollic roller. They have had to have 1 of the studmounts welded. 11.20 on motor and 9.90 on spray. 400.00

 

[kovacs32]

I have set of ported (not profess.) windsor sr. I have setup for solid roller or hydrollic roller. They have had to have 1 of the studmounts welded. 11.20 on motor and 9.90 on spray. 400.00

Brent, this guy is a good friend of mine. You pmed me about his heads a while ago, hes not a bullshitter just to let you know.

Ryan

 

[DarkoStoj]

i have 2 brand new not rebuilt gt40p heads $300

 

[mystang]

I have set of ported (not profess.) windsor sr. I have setup for solid roller or hydrollic roller. They have had to have 1 of the studmounts welded. 11.20 on motor and 9.90 on spray. 400.00

What kind of cash am I looking at to have it fixed?

 

[slow5.0]

I've got a set of gt-40x heads (not gt-40p off an explorer) fresh with manley serve duty valves, new push rods, new vavle spring, 1.72 roller rockers, comp guide plate, ARP head studs and Luntia hyd roller cam. good combo for high 11's low 12's on stock short block. I just listed some parts on this site check it out.

 

[86 jewel]

What kind of cash am I looking at to have it fixed?

I have a buddy of mine gettting the head fixed hopefully by the end of the week.But I will be paying for that.

 

[mystang]

I have a buddy of mine gettting the head fixed hopefully by the end of the week.But I will be paying for that.

cool, let me know when they are fixed then.

 

[86 jewel]

cool, let me know when they are fixed then.

Just to let you know the heads are done just need to be assembeld. Please let me know if you are still interested.