Fryguy302
Club Member
SBF stuff-
8.2 deck Super Victor SBF intake manifold, ported by Thom Bates, powder coated, with fogger nitrous system with Cold Fusion solenoids, no jets, very nice intake, $550
Brand new, never used, fake Victor JR heads for SBF. There are set up for hyd cam and come with used FMS 1.6 ratio roller rocker arms, $550
DSS 357ci short block, forged flat top pistons set up for TFS TW heads, very low miles since new, and just back from machine shop where it was cleaned, honed, inspected, re-assembled. Has main girdle also, $900 firm
LS Stuff-
Callies forged 4340 stroker crank for LS engines, 4.125" stroke, just checked and polished at machine shop, already balanced for steel rods and 441ci, $450 obo
Bullet custom ground turbo cam for LS engines, solid roller, set up for 370-408ci turbocharged combination, $200 obo
MAST 245cc CNC cathedral port 6 bolt race heads, set up for solid roller, with T&D shaft rocker system. These heads were damaged during a piston failure and are currently being repaired. They should perform as good as new when they're completed and should not be weakened. They will have all brand new valves and a valve spring kit with 10 passes on them. I will sell these for 50% of the new price. This price will vary depending on which valves you want.
These are the heads:
https://www.mastmotorsports.com/products/ls1-245?variant=22799936006
8.2 deck Super Victor SBF intake manifold, ported by Thom Bates, powder coated, with fogger nitrous system with Cold Fusion solenoids, no jets, very nice intake, $550
Brand new, never used, fake Victor JR heads for SBF. There are set up for hyd cam and come with used FMS 1.6 ratio roller rocker arms, $550
DSS 357ci short block, forged flat top pistons set up for TFS TW heads, very low miles since new, and just back from machine shop where it was cleaned, honed, inspected, re-assembled. Has main girdle also, $900 firm
LS Stuff-
Callies forged 4340 stroker crank for LS engines, 4.125" stroke, just checked and polished at machine shop, already balanced for steel rods and 441ci, $450 obo
Bullet custom ground turbo cam for LS engines, solid roller, set up for 370-408ci turbocharged combination, $200 obo
MAST 245cc CNC cathedral port 6 bolt race heads, set up for solid roller, with T&D shaft rocker system. These heads were damaged during a piston failure and are currently being repaired. They should perform as good as new when they're completed and should not be weakened. They will have all brand new valves and a valve spring kit with 10 passes on them. I will sell these for 50% of the new price. This price will vary depending on which valves you want.
These are the heads:
https://www.mastmotorsports.com/products/ls1-245?variant=22799936006