???Primaries not squirting???

80notch

80notch

Forum Member
Just pulled the Demon off the shelf, cleaned it up and bolted it on. How come it is not getting any fuel on the primary side? I have two lines coming from the regulator. The Holley was getting fuel so i know it has nothing to do with the fuel system.

Also, what are the initial settings to get this thing started? Has four corner idle screws. Any help appreciated.

Thanks JJ
 
80notch said:
Just pulled the Demon off the shelf, cleaned it up and bolted it on. How come it is not getting any fuel on the primary side? I have two lines coming from the regulator. The Holley was getting fuel so i know it has nothing to do with the fuel system.

Also, what are the initial settings to get this thing started? Has four corner idle screws. Any help appreciated.

Thanks JJ
Click to expand...

we tryed that carb on a buds car pain in the ass,very touchy,good luck.
 
80notch said:
Guess I'm gonna put the Holley back on till I go thru this thing.

Thanks guys.
Click to expand...

pull the bowl off and blow out the metering block with a air hose. also make sure the accelerator pump is hooked up, if you had the bowls off maybe you didnt put it back together right and the screw aint hitting the arm
 
johnquick302 said:
pull the bowl off and blow out the metering block with a air hose. also make sure the accelerator pump is hooked up, if you had the bowls off maybe you didnt put it back together right and the screw aint hitting the arm
Click to expand...

thats what i would do, worst case is he needs to replace the diaphram
 
Found the problem! It was missing the cam for the primary accelerator pump!:banghead:

Still gotta adjust it some, but sounds good. Might have to make a
"Calling Out" thread..........NOT!

It seems like it's not getting enough fuel to the primaries still. I suck at adjusting these things. Can't get it to idle. Anybody wanna adjust this thing for me? LOL
 
You must log in or register to reply here.
Back
Top