**Place needed on the east side to fix a car trailor***

[orangejuiced86]

I need a trailor to be fixed, any recomendations? Basically I need the brackets that hold the leaf springs on fixed and new bolts put in. I would do it, but I have zero free time during the nights this week to work on it.

 

[1BADAIR]

the shackles, plastic spacers and bolts at the the pivot between axles?

 

[redvette93]

its spelled trailer

 

[CMYZ28]

its spelled trailer

lmfao

 

[1BADAIR]

do they look like RAj's

 

[BigWheelinBubba]

Call Diamond Fab.. 586-443-5297

 

[CMYZ28]

what's the #?? D I A M O N DDDDDDDDDD lmfao

 

[orangejuiced86]

its spelled trailer

thank you, sorry about the mispelling. I hope in the near future you will find it in your heart to forgive me.

 

[orangejuiced86]

do they look like RAj's

exactly like that, just broken.

 

[orangejuiced86]

Hey larry, where did you get those parts at?

 

[1BADAIR]

I made Raj's.
You can get them at most trailer places. i think TSC has them too

 

[QUASAR]

You can get all that stuff at Ajax trailer on 10 mile/Dequindre, NE side. They have the shackles and bolts. You can bring in your leaf and they can match it up to get you a new one if you need it. I think you get new bushings with the new leafs, not sure if you can by the bushings by themselves.

I'm sure they can do the labor also but its really not that hard. I just did all that crap last year.

 

[1BADAIR]

the bushings probably aren't bad but the plastic sleeves will need replaced

 

[QUASAR]

I had no bushing material left when my shackles started to oblong. They got so bad that one of the shackles almost cracked thru. Not good. So I spend the cashola on some shackles, u bolts, and a leaf.

FYI, the type of nuts that they use require air tools to install (and remove). just fyi if you do decide to do it yourself.

 

[1BADAIR]

One of raj's was broke. I didn't get a pic of that one though. The nuts are hard to use without air. I use loctite on them too

 

[hatchback]

i could make those parts for you at work OJ, i have nothing to do! send me dimentions and presto like new!

 

[QUASAR]

They are like a buck a piece, is it really worth the hassle?

 

[orangejuiced86]

You can get all that stuff at Ajax trailer on 10 mile/Dequindre, NE side. They have the shackles and bolts. You can bring in your leaf and they can match it up to get you a new one if you need it. I think you get new bushings with the new leafs, not sure if you can by the bushings by themselves.

I'm sure they can do the labor also but its really not that hard. I just did all that crap last year.

I dont have a problem doing the work if I had time. I have air tools, but my wife goes to school everynight and I have my son. So it is easier fr me to just drop it off and pick it up.

 

[orangejuiced86]

i could make those parts for you at work OJ, i have nothing to do! send me dimentions and presto like new!

I do appreciate the offer! The trailer isnt at my house right now so its kinda tough to get the dimensions.