New rims & meats for the Cobra

Those look great. Im have 315 Toyos on mine. I had those same tires a while back. Look great but wear quickly.
 
Anyways, spent a majority of my time at work this morning heating and pounding on the one spot it was rubbing, and I got the pass side on without a spacer. This is as tucked in as it's going to get, as there is no spacer, and this is as deep as the 6.75" backspace of the CCWs will allow.

4650230792_f53dc671c8_b.jpg


4650229746_3fc3908c55_b.jpg
 
Chris Hansen said:
Anyways, spent a majority of my time at work this morning heating and pounding on the one spot it was rubbing, and I got the pass side on without a spacer. This is as tucked in as it's going to get, as there is no spacer, and this is as deep as the 6.75" backspace of the CCWs will allow.

4650230792_f53dc671c8_b.jpg


4650229746_3fc3908c55_b.jpg
Click to expand...

are you rubbing on the rear irs cradle bracket ????
 
were still using them as places to hold the car to the trailer .. lol ... ( solid swappd ) but the solid axle put like another 3/4 " or so wider per side ..the stock cobra wheels with 275 dragradials are now almost needing a fender roller ( which were doing anyway to accomodate a 10.5 radial.)
 
This morning I let my Dad drive the Cobra home from breakfast so I could see how the car looked from behind with the 345 radials. I spent most of yesterday fitting them without the spacer, and did get them to fit, but I did toss the spacers back on just to be safe to take our camping road trip this weekend, so don't mind that they're sticking out. They will sit in 1/4" or so from where they are now. Also don't mind that the car is filthy from the 2 hour drive.

4653358215_a1740c0c7b_b.jpg


4653319797_d7a3ed94b2_b.jpg


4654053236_9e9459c239_b.jpg


4654000240_fd2acc4fec_b.jpg


4653402123_aa82f86b8c_b.jpg


4653957898_2fbafc688b_b.jpg


4653412403_10973147b0_b.jpg
 
You must log in or register to reply here.
Back
Top