Need to Borrow a Tube Bender

[4 cam tbird]

I have some 3/8", 1/2" and 5/8" Aluminum tubing I need to bend. I can't find anything cheap that will do the 5/8" tubing. So at minimum I'm looking to borrow something that can bend just the 5/8" stuff. Anyone have something I can borrow? I should be able to knock it all out by the end of this weekend.

The tubing also has ends/fittings on it already, so a spring type bender will not work.

 

[LT1Pat]

I have a 3/8 one you can borrow

 

[FirecatF7]

I might have one you can use, in Clawson too.

PM me tomorrow.

 

[4 cam tbird]

I picked up something on ebay last night that does 1/4 to 7/8 and had dies for all three sizes in between that I needed. It was almost half off compared to a new one of the same type of tool and was an actual auction so I pulled the trigger.

 

[FirecatF7]

I picked up something on ebay last night that does 1/4 to 7/8 and had dies for all three sizes in between that I needed. It was almost half off compared to a new one of the same type of tool and was an actual auction so I pulled the trigger.

Mine is from woodward fab. $100

 

[4 cam tbird]

I won an auction for a used one of these for $76
http://compare.ebay.com/like/230836906683?var=lv&ltyp=AllFixedPriceItemTypes&var=sbar

 

[FirecatF7]

I won an auction for a used one of these for $76
http://compare.ebay.com/like/230836906683?var=lv<yp=AllFixedPriceItemTypes&var=sbar

Pretty cool, haven't seen one like that.

I think I have seen your CTS-V Wagon, I was in a white G8 GXP last year at 14 and crooks, I might have been trying to race you, haha.

 

[4 cam tbird]

Probably a good chance it was me if it were black with graphite wheels, though I can't say I specifically remember a white GXP trying to play.