My 95 Talon gets more

[wide winger]

Well since I had the fuel tank out and the shitty stock rear subframe was calling me names, I decided to remove it and replace it with a chromoly subframe from Maguns Motorsports and since I was doing that I replaced all my stock rear bushings with polyurethane bushings.
Things are getting out of hand.

Rear upper A arm and knuckles powered and bushed.

A few subframe pics while I work out all the bugs, and there are a few of them!

Here is a pic of the factory unit

 

[CMYZ28]

Wow!! Did you figure out the weight difference??

 

[chacho44]

Damn that things a boat anchor, I miss my awd 5sp 92. Great car till the t belt broke.

 

[wide winger]

Progress:
The new fuel rail and hoses are now in place.

Made a bracket for the ignition system.

Fixed the lower control arm improper length issue.
Now its on the the sway bar and anti lock wiring.

And the fuel filler pipe needed a little tweak to snake around the subframe.

 

[wide winger]

Did some more cutting and fitting on the rear end, installed sway bar link attachment points.

Had to put a piece of tubing on the lath and remove a couple of thousandth to make it slide inside the sub-frame tubing so I could mount the sway bar mounting plate.

Now the sway bar will be able to go back onto the car and work.

The plates that will hold the anti-lock wiring connection points to the sub-frame.

 

[wide winger]

Wrestled the rear end into position in the sub-frame.
Took some finessing to get every single stinking bolt hole to line up on the sub-frame to the pumpkin and the rear diff cover, but that's normal for after market parts.
One problem solved, next!

 

[WayFastWhitey]

looks like a sweet setup!

 

[will2045]

that tubular set up is awesome!