Mustang Fuel hoses

mymizzery

mymizzery

Forum Member
I could use some help here, I am converting an 87 mustang from a 4 cyl to 8 cyl, when the old motor was removed the Fuel hoses that connect the steel fuel lines to the fuel rail were cut. now that I am about to put the motor in the car I am having trouble finding replacement hoses. I prefer to use factory hoses, but can't find anything anywhere. I don't want to buy an aftermarket kit that includes the lines (building on a budget). what have others done? are they easy to make out of rubber fuel line hose and just connect the proper ends? I could really use some advice here my project is on hold because of this.
 
No one? Come on Motown. I know someone knows where I can find some, or at least point me in the right direction.
 
AMP performance in Arizona has performance parts & a lot of old NIB parts.They had a fuel rail for my 97 cobra! I think they have a junk yard on site.
Good luck!
 
If they are the ones I am thinking of, they were crimped to the steel lines that run to the back of the car, correct? Right now you just have the male spring-lock ends of the connector line to the rail hanging down the right front of the block, correct?
I bought all new pre-bent fuel lines for mine, and they came with the engine-end flex hoses crimped in place. I wanted to make a jumper. So I was able to buy the male ends from one of the big-box parts stores. It was a 5/16 barb on one side, and either of the 2 sizes of spring-lock on the other.
MAYBE they sell the female side??? Then you could rig something with double barbs and clamps??
 
You must log in or register to reply here.
Back
Top