Mustang Coil-overs

[1BadLSC]

Does anybody have Tubular K-member, a-arms and coil overs on their mustangs that do not make all sorts of noise? If so list your setup, what cc plates, struts,k coil-over kit, etc. I have been looking to have some a-arms made up to work for my car but nobody seems to want to do it so it looks like I will be stuck with coil-overs.

 

[UR2SLW]

i have a tubular k member and a arms and coilovers on my cobra its upr stuff, cc plates are upr i think too, got the whole setup at the same time, i had drag springs then changed to a more street strip spring not much noise and dropped a ton of wt and it handles good too..let me know if u got any other ?'s

 

[Anthony]

AJE K member, AJE A arms, AJE caster plates, D&D coilovers. No noise. What kinda noise are you refering too?

 

[Team Z Motorsports]

it's usually in the caster and camber plates, and coil over kit when there is allot of noise!

that's why we made our own C&C plates with tighter tolerances, and use a strange coil over kit with our K member!

 

[97blksvt]

it's usually in the caster and camber plates, and coil over kit when there is allot of noise!

that's why we made our own C&C plates with tighter tolerances, and use a strange coil over kit with our K member!

Any answer why mine makes noise I got Maximum Motorsport casters, and qa1 threaded struts, are my springs to soft 175 14inch for a full weight sn95 besides the front end.

 

[soap]

Any answer why mine makes noise I got Maximum Motorsport casters, and qa1 threaded struts, are my springs to soft 175 14inch for a full weight sn95 besides the front end.

Similar setup as to what I have except I use UPR coilovers and Tokico struts.

--Joe

 

[2L8IWIN]

PA Racing Tubular K-Member, Muscle Motors A Arms, Muscle Motors Coil Over/Springs, Tokico Illumina Struts, Maximum Motorsports 4 Bolt C/C Plates.

No noise, rides great.

Does anybody have Tubular K-member, a-arms and coil overs on their mustangs that do not make all sorts of noise? If so list your setup, what cc plates, struts,k coil-over kit, etc. I have been looking to have some a-arms made up to work for my car but nobody seems to want to do it so it looks like I will be stuck with coil-overs.

 

[Team Z Motorsports]

Any answer why mine makes noise I got Maximum Motorsport casters, and qa1 threaded struts, are my springs to soft 175 14inch for a full weight sn95 besides the front end.

it's usually slop in the caster and camber plates, I doubt a 175 is to soft!

 

[Anthony]

where would this slop be? i would be assuming all nuts and bolts are tight.

 

[97blksvt]

where would this slop be? i would be assuming all nuts and bolts are tight.

Yeap I even called MM twice to ask for the spacer adjustments, I wish I still had it all together, hopfully its beter when everything goes back in

 

[Team Z Motorsports]

the slop is in the bushings that the strut rod goes through!