99slverZ
Club Member
Bought a Mustang earlier today and it came with a ton of parts from previous setups on the car. I am still completely new to the Mustang stuff and most of the pricing came from a little google search and looking on other forums. Some stuff is new, some is used but in good shape.
(3R3Z-8005-BA) 03 Cobra Radiator-All aluminum- Looks brand new, if it was used it was for mock up. A few dings in the fins from moving it around but nothing too crazy. $160 OBO
(MNC8200AE) 1998-2003 Jaguar XJ8 Radiator OEM- I'm assuming he was going to use this for a transmission cooler? Its about half the height of the Cobra radiator, Half as thick and almost the same width. $100 OBO
BBK Headers- Shortys- They are used and in "fair" shape, will need cleaned up. I'm assuming they came off this car(94-95 5.0L GT)- $60 SOLD
2.73 Rear end gear 8.8", used good condition. - $50
Ford Breakout Box EECIV- This looks like an OEM ford box with the wiring harness on it. I've seen these range from $200-$900 on google just depending on the brand, if you'd like pictures and would make a fair offer we can make a deal.
Kenne Belle Dual 75MM TB- I will have to call them on Monday, its a brand new billet dual throttle body. The only one I can find on their website is for the the Mammoth Blowers for the '05 Mustangs, Shelbys and 03/04 Cobras. If your interested let me know and I'll call to be sure, its brand new in box.
(f040d6) K&N Universal 14" long, 6" base diameter, 4.75" end diameter- , maybe slightly used but mint. $35
Kenne Belle Intake Filter, Oval. Again like the throttle body I'm not sure on it, no part #. It has Kenne Belle stamped on it with a Oval inlet, looks like it will fit the dual TB perfect. brand new in wrapping.
(1524) BBK Throttle Body, 75mm, Ford, Mustang, 5.0L 94-95 Mustang GT- $140. Appears complete, used.
(8950)MSD RPM Activated Switch- $65
Kenne Bell Boost-A-Spark, Good condition. Doesn't have dial with it. All the ones I find online show a dial and I don't see one with it. $100.
Kenne Bell BLowZilla Supercharger for 5.0/302, I have two of these. One polished, one black. The black one has the "FLOW ZILLA" elbow. The polished one has kind of a custom upper piece on it that was welded on. I do have the orignal one that says "Kenne bell supercharged" but you'd have to cut the welds to bolt the OEM one on. I have a few different elbows (the piece for the back) for the polished one. I hope that makes sense, I'm not familiar with these blowers at all. He did have both of them on the car at one point in time. The polished one is in fair condition, the black one is in good condition. The car made 580rwhp on a 347/pump gas with this blower according to the previous owner. Both spin freely. $1,400 OBO for the black one, $1,000 OBO for the polished one. http://stangup.com/index.php?topic=2866.0 (Gt40 only). They look identical to the GT40 only blower, if your interested in this and would like detailed pictures to see if I'm missing anything feel free to ask. You might know better than I do!
(RF-f3up-7a040-aa)- AOD OEM Tailshaft housing- I have two of these- $30/each.
(10-24504-03) Johnson Magnetic Driven Centrifigual Pump- I think he was using this for an ice tank for the blower. -$90 http://www.marinepartssource.com/ne...ON PUMP&desc=Magnetic Driven Centrifugal Pump
(E9AZ-9F715-B) Walbro Idle Air Control Valve 5.0L Mustang-$30
(f6az-7a098-a)-Transmission Filter 4r70-$10
I still have a bunch more stuff, stock intakes, ice chiller tank for blower, etc. I will be adding this when I have more time. here is a picture of the lot. Not the greatest but if you are interested in a specific item please let me know and I can take pictures of just that if you'd like.
I also have a bunch of misc for DIY turbo guys, let me know if you want a closer look.
Thanks!
(3R3Z-8005-BA) 03 Cobra Radiator-All aluminum- Looks brand new, if it was used it was for mock up. A few dings in the fins from moving it around but nothing too crazy. $160 OBO
(MNC8200AE) 1998-2003 Jaguar XJ8 Radiator OEM- I'm assuming he was going to use this for a transmission cooler? Its about half the height of the Cobra radiator, Half as thick and almost the same width. $100 OBO
BBK Headers- Shortys- They are used and in "fair" shape, will need cleaned up. I'm assuming they came off this car(94-95 5.0L GT)- $60 SOLD
2.73 Rear end gear 8.8", used good condition. - $50
Ford Breakout Box EECIV- This looks like an OEM ford box with the wiring harness on it. I've seen these range from $200-$900 on google just depending on the brand, if you'd like pictures and would make a fair offer we can make a deal.
Kenne Belle Dual 75MM TB- I will have to call them on Monday, its a brand new billet dual throttle body. The only one I can find on their website is for the the Mammoth Blowers for the '05 Mustangs, Shelbys and 03/04 Cobras. If your interested let me know and I'll call to be sure, its brand new in box.
(f040d6) K&N Universal 14" long, 6" base diameter, 4.75" end diameter- , maybe slightly used but mint. $35
Kenne Belle Intake Filter, Oval. Again like the throttle body I'm not sure on it, no part #. It has Kenne Belle stamped on it with a Oval inlet, looks like it will fit the dual TB perfect. brand new in wrapping.
(1524) BBK Throttle Body, 75mm, Ford, Mustang, 5.0L 94-95 Mustang GT- $140. Appears complete, used.
(8950)MSD RPM Activated Switch- $65
Kenne Bell Boost-A-Spark, Good condition. Doesn't have dial with it. All the ones I find online show a dial and I don't see one with it. $100.
Kenne Bell BLowZilla Supercharger for 5.0/302, I have two of these. One polished, one black. The black one has the "FLOW ZILLA" elbow. The polished one has kind of a custom upper piece on it that was welded on. I do have the orignal one that says "Kenne bell supercharged" but you'd have to cut the welds to bolt the OEM one on. I have a few different elbows (the piece for the back) for the polished one. I hope that makes sense, I'm not familiar with these blowers at all. He did have both of them on the car at one point in time. The polished one is in fair condition, the black one is in good condition. The car made 580rwhp on a 347/pump gas with this blower according to the previous owner. Both spin freely. $1,400 OBO for the black one, $1,000 OBO for the polished one. http://stangup.com/index.php?topic=2866.0 (Gt40 only). They look identical to the GT40 only blower, if your interested in this and would like detailed pictures to see if I'm missing anything feel free to ask. You might know better than I do!
(RF-f3up-7a040-aa)- AOD OEM Tailshaft housing- I have two of these- $30/each.
(10-24504-03) Johnson Magnetic Driven Centrifigual Pump- I think he was using this for an ice tank for the blower. -$90 http://www.marinepartssource.com/ne...ON PUMP&desc=Magnetic Driven Centrifugal Pump
(E9AZ-9F715-B) Walbro Idle Air Control Valve 5.0L Mustang-$30
(f6az-7a098-a)-Transmission Filter 4r70-$10
I still have a bunch more stuff, stock intakes, ice chiller tank for blower, etc. I will be adding this when I have more time. here is a picture of the lot. Not the greatest but if you are interested in a specific item please let me know and I can take pictures of just that if you'd like.
I also have a bunch of misc for DIY turbo guys, let me know if you want a closer look.
Thanks!
Last edited:
