Looking for a few foxbody items..

5

5.0guy

Forum Member
Hey guys, I'm trying to get this car on the road by next weekend, for the downriver cruise. It was taken apart almost nine years ago and I just can't find some of the stuff that I need to button it up. I'm looking for a few items that some of you may have laying around.

- one or two motor mount nuts (the ones that thread on the mount, on the underside of the k-member)
- t5 clutch cable retaining clip (where the cable runs through the bellhousing)
- 87-93 headlight assemblies (all six, including brackets, retainers, etc..can be cracked/faded...I just want the car to have headlights in place, on the cheap)

I could get the stuff new from Ford, but the motor mount nuts come in a pack of five, and the clutch cable clips come in a pack of eight, which is obviously more than I need. My next step will be to talk to Matt @ Varsity and see if he can sell them individually, since Southgate Ford won't split the packs up.

I live around Telegraph/Goddard, so the closer the better, but beggars can't be choosers..

Thanks!

1017650_564204228951_536781007_n.jpg

7212_564302267481_977912643_n.jpg


no, I didn't pick the color, yes, I got a good deal on it.
 
get the nuts with washers from home depot if need be and make your own clip if need be for the cable..... if its just these items you should have no problem....im trying to build a custom sheetmetal intake by then and finnish the engine build. lol
 
I got the correct nuts (10.9 top lock flange) and bolts from a local supplier for less than just the motor mount nuts would've run, before shipping, from Late Model or CJ. I'm going to run by a couple junkyards tomorrow to see if I can grab the clip and maybe some nasty headlights.

Sent from my EVO LTE using Tapatalk 2
 
If u have the cable of the car take it to home depot and get a snap ring for it. Or if you can measure it do it that way.
 
You must log in or register to reply here.
Back
Top