apyah
Club Member
I am suprised they have not sold this yet, I have seen it and heard it. would be a great car for right person guy dumped alot of money in this car they want 10,000
Naturally aspirated big bore 4.7 Cobra motor w/32valves
Custom JE forged pistons
11:1 compression
Eagle forged steel rods
Short block assembled by Livernois Performance
Heads ported by Houston Performance
Comp Cams valve springs w/steel retainers
SHM stage II Cams235 degree exhaust durationW/0.425 lift-225 degree intake duration w/0.474 lift
SHM forged steel oil pump gears
Custom short runner intake manifold 5 runners, all ported and polished
BBK twin bore 62mm throttle body
BBK full length headers with x pipe
ASP underdrive pullies
FMS 30lb injectors
87mm pro m mas air meter
Auto logic computer chip
Drivetrain
Tremek 3550 TKO
26 spline input shaft
2nd, 3rd, 4th gears have been pro shifted by liberty transmissions
SPEC stage III clutch
Aluminum driveshaft
Solid rear axle 8.8
4:56 gear
Strange Axles with screw in studs
Axle tubes welded
Rear end put together by DTS
Trac Loc c locker differential
Suspension
D&D tubular front k member and control arms
D&D coil over kit w/175 pound front springs
Strange adjustable front struts
Complete wolfcraft racing suspension w/antiroll bar, double adjustable upper and lower control arms- note suspension needs dialed in.
Full length sub frame connectors
1,000 miles on motor and drive train
vehicle will be sold as is
various spare parts available for additional cost.
Any questions call rob @ 734-732-3033
or e-mail'
[email protected]
http://i39.photobucket.com/albums/e152/apyah/th99mustang7.jpg
[IMG]http://i39.photobucket.com/albums/e152/apyah/th99mustang2.jpg[/IMG]
Naturally aspirated big bore 4.7 Cobra motor w/32valves
Custom JE forged pistons
11:1 compression
Eagle forged steel rods
Short block assembled by Livernois Performance
Heads ported by Houston Performance
Comp Cams valve springs w/steel retainers
SHM stage II Cams235 degree exhaust durationW/0.425 lift-225 degree intake duration w/0.474 lift
SHM forged steel oil pump gears
Custom short runner intake manifold 5 runners, all ported and polished
BBK twin bore 62mm throttle body
BBK full length headers with x pipe
ASP underdrive pullies
FMS 30lb injectors
87mm pro m mas air meter
Auto logic computer chip
Drivetrain
Tremek 3550 TKO
26 spline input shaft
2nd, 3rd, 4th gears have been pro shifted by liberty transmissions
SPEC stage III clutch
Aluminum driveshaft
Solid rear axle 8.8
4:56 gear
Strange Axles with screw in studs
Axle tubes welded
Rear end put together by DTS
Trac Loc c locker differential
Suspension
D&D tubular front k member and control arms
D&D coil over kit w/175 pound front springs
Strange adjustable front struts
Complete wolfcraft racing suspension w/antiroll bar, double adjustable upper and lower control arms- note suspension needs dialed in.
Full length sub frame connectors
1,000 miles on motor and drive train
vehicle will be sold as is
various spare parts available for additional cost.
Any questions call rob @ 734-732-3033
or e-mail'
[email protected]

http://i39.photobucket.com/albums/e152/apyah/th99mustang7.jpg
[IMG]http://i39.photobucket.com/albums/e152/apyah/th99mustang2.jpg[/IMG]