Install Mustang-II, advice?

[39chevy]

I have a must II IFS I am tacking in and I am thinking about putting a 1 to 2in drop, maybey! My question is To keep it stock I will weld my spring towers on top of my frame rail. If I drop my spring towers say 1 inch below the top of frame rail, which will drop it 1 inch, will I have to drop my must II crossmember also because it seems like my springs might get pretty tight, or off wack not sure, advise, thanks, Dana

 

[pacecarBBC]

I have a must II IFS I am tacking in and I am thinking about putting a 1 to 2in drop, maybey! My question is To keep it stock I will weld my spring towers on top of my frame rail. If I drop my spring towers say 1 inch below the top of frame rail, which will drop it 1 inch, will I have to drop my must II crossmember also because it seems like my springs might get pretty tight, or off wack not sure, advise, thanks, Dana

dont drop the upper shock tower, depends on who's kit you use, but i would put the xmember in and use dropped spindles. i sell and install Heidt's products, let me know if i can help. Todd