Injector and MAF sizing

[OldbutNew]

So I am gathering parts for an engine project for the '88. Looking for input on MAF and injector sizes:

Stock block
331 stroker
Old Performer RPM heads (2.02/1.60)
Cast GT40 U/L
70mm TB
Fenderwell CAI
~ 10:1
220/224 .540/.575 Comp roller

24 or 30#?? 75mm MAF?? 80??

Whaddayathink??

 

[red347lx]

Slap a turbo on it and be off to the races!!!

 

[OldbutNew]

Slap a turbo on it and be off to the races!!!

Wow! Thank u so much Mister Helper...:wank:

 

[hangemhigh]

30 and 75....Imo...

 

[red347lx]

I try!!

 

[OldbutNew]

I try!!

LOL... Hey I found some -10. Still looking for fittings.

 

[OldbutNew]

30 and 75....Imo...

Thank you sir! Pretty much what I was thinking. I figured 24's would be a little far into the duty cycle on the top end.

 

[hangemhigh]

Thank you sir! Pretty much what I was thinking. I figured 24's would be a little far into the duty cycle on the top end.

Definitely....We use 24's with an e-303....

Sounds like a nice combination you're getting together..:thumbsup:

 

[OldbutNew]

Thank you once again Sir.
I'm looking forward to putting enough under the hood to match the chassis. I'm not in any hurry. Just gathering parts right now.

 

[red347lx]

Definitely....We use 24's with an e-303....

Sounds like a nice combination you're getting together..:thumbsup:

What's this guy know about a Ford anyway? He probably doesn't even own one!!






















lol

 

[TooSlo86]

I just had to upgrade to 30's due to running 87% DC on my old 24's, and that's on a stock Explorer LB with untouched GT40P heads so I would definitely agree with the 30's for you. FWIW I also run an 80MM 03-04 GT maf.

 

[hangemhigh]

What's this guy know about a Ford anyway? He probably doesn't even own one!!
lol

Nope.....Check my avatar.....:lol:

 

[94 Drop]

Need 30's? Let me know I have 2 sets and a MAF.

 

[OldbutNew]

Need 30's? Let me know I have 2 sets and a MAF.

Tom 'ol buddy, you have e-mail.

 

[OldbutNew]

OK. That's settled.

How about fuel pump? 190LPH enough? Stock lines and rails?

 

[TooSlo86]

OK. That's settled.

How about fuel pump? 190LPH enough? Stock lines and rails?

That's what I run and haven't had issues of it leaning out up top. 6500 through the traps anyhow.

 

[OldbutNew]

That's good enough for me.