gdwrench
Forum Member
Here's the scoop.....I put a full exhaust on my car ( 64 Impala/Biscayne) at the end of last summer,from the Collectors (3.5) all the way back to the rear bumper is alluminized 3" tube, I used 2 Chamber Flowmasters at the rear bumper. There's a disconnect right before the Axle on either side(tube's went over axle), and when the system was new I put a coat of High Temp paint on it and it still looks new (actually is new?)
Well, going a different direction now so I need it gone.... Being such a long car, there is plenty of straight tube and lots of bends and different angles, and it's all Mandrel bent tube. The mufflers are new also, I had over $600 just in Material & Muffler's doing this exhaust.
Might be willing to trade for it, if it's something I need but I'd take $300 for what's here......:doh:
If ya need pics, shoot me a PM
Gary-- 734 751 3132
Well, going a different direction now so I need it gone.... Being such a long car, there is plenty of straight tube and lots of bends and different angles, and it's all Mandrel bent tube. The mufflers are new also, I had over $600 just in Material & Muffler's doing this exhaust.
Might be willing to trade for it, if it's something I need but I'd take $300 for what's here......:doh:
If ya need pics, shoot me a PM
Gary-- 734 751 3132