FS 1964 426 Hemi 700HP Motor

B

bouncy

Forum Member
FS: 1964 Nascar Hemi Complete motor
Item Description: 1964 Nascar Hemi Complete motor
Location: Flat Rock, MI
Price: $18,000
Contact: PM me here OR jeepcj7 at gmail dot com I can provide phone contact after email contact is made.
Only serious buyers please.

This motor was built by Dean Nicopolis. Google his name for history of him being one of the orginal Ramchargers.

This is a 1964 iron block factory dated 1964 and produced with 1/2" main side bolts. Limited quantity produced for NASCAR. Heads are A990 option cylinder heads as supplied on 1965 race cars by the factory. Intake manifold is a 1996 new design aluminum crossram. Also a second intake Rat Roaster model orginal dual quad inline setup. Full radius crankshaft with orginal hemi connecting rods. Pistons are TRW with custom machining to remove weight and match cylinder head valves and chamber. Cam is a billet roller camshaft and comp cam lifters solid roller. Sealed Power rings with .031 dykes top, cast iron second and 1/8 oil ring (3pc). Light weight sprockets with roller chain cam drive.

Engine Specs.
Bore 4.311"
Stroke 3.750
Compression Ratio 12:1
Valves intake 2.2 exhaust 1.940
Stock hemi valve train, intake rocker 1.57:1 exhaust rocker 1.53:1.
Camshaft 292-04 .750 theorotical lift, actual is .715 install at 103.5 degrees at valve.
Valve lash .030 both intake and exhaust hot or cold.
Valve springs K-Motion 1000h
Engine operating range 2000-7500rpms max.


Pictures located here: http://s197.photobucket.com/albums/aa247/youtube72/Hemi/
 
Last edited:
umm not to offend you but 3 posts only in the for sale section, no profile, and some shady spam looking ads like, at gmail dot com, i sure hope someone doesnt get screwed... at least introduce yourself and fill out your profile...
 
Im 99% I know this motor, I think it used to sit on the floor at the Livonia ramchargers, if its the same motor I have the full build for this motor, and all assembly specs
 
moneypit said:
Im 99% I know this motor, I think it used to sit on the floor at the Livonia ramchargers, if its the same motor I have the full build for this motor, and all assembly specs
Click to expand...

Yes thats the exact motor. I bought it from Dean when it was sitting there. My buddy John worked at Livonia RC and called me about the motor to tell me it was for sale.

As for the Dot Com for my email...It avoids spammers.

As for lack of profile. I am at work...I have had limited time...And I JUST got access to post this morning.

And yes 3 posts...I put 3 things up for sale today...

I was told about this board from xceed speed board and told to post the hemi here. I listed my 2 cars also.
 
hourang said:
umm not to offend you but 3 posts only in the for sale section, no profile, and some shady spam looking ads like, at gmail dot com, i sure hope someone doesnt get screwed... at least introduce yourself and fill out your profile...
Click to expand...

Not much in the profile I can fill out.

I listed what info has boxes except IM info. I don't have a webpage.

So Profile is Filled out.

As for Intros...Hi! :smoke:
 
when diid you buy the motor? I was offered that motor from dean about 2 years ago. Either way it doesnt matter, send me contact info I should beable to find the info on that motor, It has all the specs for the motor
 
moneypit said:
when diid you buy the motor? I was offered that motor from dean about 2 years ago. Either way it doesnt matter, send me contact info I should beable to find the info on that motor, It has all the specs for the motor
Click to expand...

Couple of years ago huh...

My contract with Dean is from 9/21/2001 and his doc sheet is from 9/26/2002 Signed by him.

Sending you a PM.
 
It might have been a similar motor, but if yours was the one right inside the door on the RH side, I had might have tossed the specs on it
 
You must log in or register to reply here.
Back
Top