raroz28
Forum Member
Replaced my innter and outer tie rods, upper and lower ball joints, and sway bar end links on my 97 z28 in may of 2009.
About 6 months ago it started squeaking and has gotten worse. It squeaks when I turn the wheel, hit a bump, etc.. Even when I push down on the fender.
A friend said it is probably the outer tie rod, so I replaced that and it's still squeaking.
Could it be the lower ball joint? It is on the passenger side.
I have also read that sometimes sway bar bushings can be noisy, but I'm not so sure that is the problem.
Any suggestions as to how I can track this down? It's really annoying.
About 6 months ago it started squeaking and has gotten worse. It squeaks when I turn the wheel, hit a bump, etc.. Even when I push down on the fender.
A friend said it is probably the outer tie rod, so I replaced that and it's still squeaking.
Could it be the lower ball joint? It is on the passenger side.
I have also read that sometimes sway bar bushings can be noisy, but I'm not so sure that is the problem.
Any suggestions as to how I can track this down? It's really annoying.