Fox aftermarket seat brackets

[xcoldricex]

What do you guys usually use to mount your race seats? Any good/cheap brackets? I have a set of Sparco seats I want to put in my Capri.

 

[Billydroveit]

Reuse a factory seat track (what i did). Or Look on Holcombmotorsports website.

 

[xcoldricex]

thanks, I'll try that first

 

[xcoldricex]

found a good thread on CC about this stuff: fox seat brackets

 

[bottlefed93]

jegs sells some also iam not sure if they will work for you or not #555-70223

 

[93notch408]

holcomb motorsports has bad ass 1s that fit good and most race seats fit on em there like 60 a peice

 

[93notch408]

http://shop.holcombmotorsports.com/product.sc?productId=1275&categoryId=68

link

 

[Sean]

I have seen alot of guys modify the factory brackets. They do sell universal seat mounting brackets.

 

[xcoldricex]

do you guys take the bottom plate out of the seats or do you just use the sliders? looks like i just need to drill in one hole for the sliders and they should bolt right up since the side to side distance of the mounting points are the same.

 

[Sean]

do you guys take the bottom plate out of the seats or do you just use the sliders? looks like i just need to drill in one hole for the sliders and they should bolt right up since the side to side distance of the mounting points are the same.

I doubt there are any hardfast rules with this type of stuff. I know I haven't found any.

 

[xcoldricex]

i just modified the sliders - bolted up easily and work pretty well. i was just asking to see if it'd be more structurally sound to have the top plate. thanks guys

 

[84mercury]

sparco has bolt in brackets for their seats in specific vehicles and if they dont corbea does