Dart331Stroker
Forum Member
I have the following parts for sale. I decided to change directions with my projects and this one is now for sale. So my loss is your gains I suppose.
1983 Mustang GLX Convertible, was a V6 car with automatic transmission. Have original motor and transmission, motor ran good trans had no reverse. Doors are good, rear deck lid is good and has a Saleen wing on it, 87-93 style LX taillights, console delete included, new carpet included, two sets of front seats (needs to be cleaned), 83 GT scoop already installed on hood, doors in good shape totally usable, fenders both replaced (one new and one used), light blue interior, nice clean door panels, dash is excellent, extra complete dash is included, needs wheels tires to remove from garage, car needs a new top (only the top is bad all hardware works fine, had top up and down using power switch many times) and a windshield, I had the old busted window removed and was not going to have one installed until I painted the car and the window openings, I also have a really nice light blue console I am including with the car. Most of the body work on the exterior has been completed, might need some light skim coats and some blocking to make perfectly straight. I want $350.00 for the car as it sits.
If interested in a package deal I will sell all the parts listed on this page and the 1983 302 Motor that came out of my 1983 GT, it is dissasembled and ready to machine, along with a set of E7 heads. I will do this for a package price of $1000.00. This is a great deal. For a really decent shape convertible.
Grey Ghost has seen the car multiple times and can vouch for its condition.
The parts alone are worth the $1000.00.
H Pipe 79-93 made by Hedman O2 sensors plugged with correct plugs can
be removed for new cars: used one summer $75.00
Flowmaster cat back system for LX with polished stainless tips and two
chamber mufflers, this was installed and started only never driven on
the street: $220.00
MSD Blaster Ford style coil for 79-85 style had pins for the stock
duraspark plug to plug into it, I also have the ford part (black plastic horseshoe shaped piece) that attaches to it from my car, used for about one month (80 miles of driving) as i went to the standard one with my MSD 6A box. sells new for $38.00 I will sell for: $30.00 no shipping, saves $16.00
Professional Products dual plane polished intake for a 302 with CSI/R aluminum
water neck, BG carb, and CSI/R throttle cable bracket will sell
complete for $375.00 or will seperate all the parts. BG carb is hardly
used Speed Demon Mechanical secondaries 575cfm (part number 1282020) perfect for mild street car, 302 to 350 motor.
8.8 Rear End with 3.55 gears, and like new brakes: $200.00
Dual Exhaust crossmember: $30.00
Convertible 5.0 Motor Mounts new: $20.00 each
Eibach Pro Kit lowering springs, still new in the box: $180.00
Dissasembled 302 1983 standard bore, complete with all internals that came out of the motor, also a set of E7 heads go with. This is a non roller style block. Block, crank, rods, pistons, front cover, oil pan, heads, balancer, etc. $100.00
Thanks and you can email me at [email protected] or call my cell
phone at 586-946-0078, if I dont answer my cell please leave a message, I cant always answer when at work, or sometimes during the evenings.
Thanks
John
All parts are located in Clinton Township,
1983 Mustang GLX Convertible, was a V6 car with automatic transmission. Have original motor and transmission, motor ran good trans had no reverse. Doors are good, rear deck lid is good and has a Saleen wing on it, 87-93 style LX taillights, console delete included, new carpet included, two sets of front seats (needs to be cleaned), 83 GT scoop already installed on hood, doors in good shape totally usable, fenders both replaced (one new and one used), light blue interior, nice clean door panels, dash is excellent, extra complete dash is included, needs wheels tires to remove from garage, car needs a new top (only the top is bad all hardware works fine, had top up and down using power switch many times) and a windshield, I had the old busted window removed and was not going to have one installed until I painted the car and the window openings, I also have a really nice light blue console I am including with the car. Most of the body work on the exterior has been completed, might need some light skim coats and some blocking to make perfectly straight. I want $350.00 for the car as it sits.
If interested in a package deal I will sell all the parts listed on this page and the 1983 302 Motor that came out of my 1983 GT, it is dissasembled and ready to machine, along with a set of E7 heads. I will do this for a package price of $1000.00. This is a great deal. For a really decent shape convertible.
Grey Ghost has seen the car multiple times and can vouch for its condition.
The parts alone are worth the $1000.00.
H Pipe 79-93 made by Hedman O2 sensors plugged with correct plugs can
be removed for new cars: used one summer $75.00
Flowmaster cat back system for LX with polished stainless tips and two
chamber mufflers, this was installed and started only never driven on
the street: $220.00
MSD Blaster Ford style coil for 79-85 style had pins for the stock
duraspark plug to plug into it, I also have the ford part (black plastic horseshoe shaped piece) that attaches to it from my car, used for about one month (80 miles of driving) as i went to the standard one with my MSD 6A box. sells new for $38.00 I will sell for: $30.00 no shipping, saves $16.00
Professional Products dual plane polished intake for a 302 with CSI/R aluminum
water neck, BG carb, and CSI/R throttle cable bracket will sell
complete for $375.00 or will seperate all the parts. BG carb is hardly
used Speed Demon Mechanical secondaries 575cfm (part number 1282020) perfect for mild street car, 302 to 350 motor.
8.8 Rear End with 3.55 gears, and like new brakes: $200.00
Dual Exhaust crossmember: $30.00
Convertible 5.0 Motor Mounts new: $20.00 each
Eibach Pro Kit lowering springs, still new in the box: $180.00
Dissasembled 302 1983 standard bore, complete with all internals that came out of the motor, also a set of E7 heads go with. This is a non roller style block. Block, crank, rods, pistons, front cover, oil pan, heads, balancer, etc. $100.00
Thanks and you can email me at [email protected] or call my cell
phone at 586-946-0078, if I dont answer my cell please leave a message, I cant always answer when at work, or sometimes during the evenings.
Thanks
John
All parts are located in Clinton Township,
