Floor pan help

[svespie]

I attempted to replace the floor pan of my 3rd Gen F-Body. Unfortunately, for a number of reasons, I botched it up and need some help. The real unfortunate thing is that I don't have a lot of money to get it fixed, but I miss driving my car!

I tried to put in a replacement pan on the driver's side that is ill fitting and requires some help. The passenger side is a bit botched but is largely untouched otherwise. It was more solid than the driver side.

I have a replacement plan for passenger side that is still in the box. I can fab the seat brackets on my own, since buckets are going in anyway. I just need a functional floor pan that looks OK with carpet over it. I would rather not use fiber glass to smooth it out.

I'd like the frame to be tied and welded into the new floor all at the same time, but it doesn't have to be too fancy, just functional. I took pictures of the floor pan and are posted as an update on the following thread illustrating my car.

http://motownmuscle.com/forums/showpost.php?p=1277382&postcount=7

If you would like to take on the job, please take a look at the pictures and give me some kind of an idea of what it might cost. I may need some time to come up with the money, so I would need to know approximately of what it would cost.

Thanks for the help!

 

[Joe]

My buddy in Clinton Township can do this for a reasonable price. Pm if you'd like to give him a call

 

[mike347]

i do sheet metal work can probably hook somthign up. it wont look factory but will look good and be solid

here is some of are work

 

[the doctor]

thats sweet

 

[WayFastWhitey]

so whats going on with this project?

 

[svespie]

so whats going on with this project?

It was put on hold for a while. Going to take it to the shop next week for an estimate on a professional repair. I recently created a webspace to track the project with. That can be found here.

Stay tuned!