86iroc305
Forum Member
I have a nice used set of Comp cams retro fit hyd. roller lifters. They are in good used condition. One lifter has a crack at the top at of the body (see pic) from a failed pushrod, i replaced the pushrod while the motor was in vehicle and did not have any issues with the lifter after that. These was close to $500 new. http://www.summitracing.com/parts/cca-853-16 Asking $225
I have a nice used set of Crower Enduro stainless roller rockers for a small block chevy. They fit 3/8 stud and are 1.6 ratio. Two rockers were replaced with Enduro II (see pic) but other than that they are great. I do not have the poly locks to go with these (usually 2-4 each from jegs or summit) these were close to $500 new. http://www.summitracing.com/parts/cro-73640-16. Asking $175
Enduro II
Enduro
I have a nice used set of Crower Enduro stainless roller rockers for a small block chevy. They fit 3/8 stud and are 1.6 ratio. Two rockers were replaced with Enduro II (see pic) but other than that they are great. I do not have the poly locks to go with these (usually 2-4 each from jegs or summit) these were close to $500 new. http://www.summitracing.com/parts/cro-73640-16. Asking $175
Enduro II
Enduro
