Exedy Hyper Single LS1 Clutch & Flywheel

O

Ortontucky Terror

Club Member
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=130328309493

asking 700, reserve at 600

I have a 0 mile exedy hyper single clutch kit. Its a really nice piece, smaller than stock billet aluminum pressure plate, a 6 puck cerametallic sprung hub disc. the flywheel is also made for this kit, its sfi approved, 1 piece steel, and pretty light. All of these parts are 0 miles but have been in storage and have some dings on them, nothing that will affect their use. I have had this for a while, but honestly have no use for it, and its just taking up space. Heres exedy's page for it

http://www.exedyusa.com/race/GH01SD

it looks like the online price for this is about $1200.

email me at [email protected], or call 248-421-7968 for Seve.

IMG_0129.jpg

IMG_0130.jpg
 
i really have no idea, these are really popular clutches in the import world, its smaller than a stock clutch, so its moment of inertia is less than a regular lightweight clutch. i would assume it would be somewhere in the 650 neighborhood, the disk looks pretty aggressive.
 
Thanks for the info I am VERY interested in this.

Though my T-56 came out of a 96 Trans am
It say LS-1 based transmissions only, I wonder if this is compatible.
If it is then I will make an offer, do you have any clue?

I thought the structure is the same.
 
NO
It was attached to a LT-1 so I know the bellhousings are different.
I am just wondering if this ONLY works in the LS-1 carrier.

The transmissions really didn't change except internally a little through the years.
 
i dont know if the bolt patterns for the flywheel to the crank are different or not, that would be the biggest problem i would imagine, and if the flywheel diameters as well
 
You must log in or register to reply here.
Back
Top