Edelbrock Victor Jr cnc ported Heads.gt 40 intake, stalls

[375stroker]

NEW CNC PORTED VICTOR JR HEADS.210cc .THEY ARE READY TO BOLT ON! 650 LIFT HYD ROLLER SPRINGS, COMP CAMS TITANIUM RETAINERS,2.05/1.60 VALVES,60CC CHAMBERS, FLOW NUMBERS ARE 286/210@550,299/218 @ .600,308/222 @ .650,312/224 @ .700.. A SET OF BOX STOCK WITH TITANIUM RETAINERS IS GOING TO COST YOU ALMOST $1800.YOU ARE GETTING THE PORTING FREE!! $1900 SHIPPED

Used Pro Flow 80mm Mass Air Meter For 86 Up Mustangs .it Is Set Up For 83 Pounds Injectors.$175 Shipped

Used Tct 9" 5500 C4 Stall. Good Condition About 15 Runs,$625 Shipped

Used Ford Ptc Ford C4 9.5 ,4000 Stall Converter.the Converter Is In Good Condition .with About 4 Passes.it Is A Big Bell Housing Converter.it Will Hold Up On A Power Adder Engine, The Converter Was About $1100,sell$425 Shipped

EMAIL ME AT [email protected]

 

[375stroker]

ttt

 

[375stroker]

ttt

 

[n8dogg2669]

you should go to the pub section and introduce yourself or people are going to get pissed and this thread may turn into a mess. just a suggestion gl with the sale

 

[$uperstang]

might want to re-think some of your prices, people on here are a lot smarter than you think.

 

[avbcon12]

might want to re-think some of your prices, people on here are a lot smarter than you think.

X2

 

[The Man]

that intake is like $500 NEW.

 

[91Notch]

X2

x3

 

[smooth]

x3

3 strikes your out :awugh:

 

[Anthony]

that intake is like $500 NEW.

show me where you can get a new GT-40 intake for $500.......unless its been sitting on a shelf for quite a few years, you cant they are no longer produced. while the price is high, $500 shipped used is the going price

 

[Scott714]

http://cgi.ebay.com/ebaymotors/ws/e...STRK:MEWA:IT&viewitem=&item=230214812371&rd=1 I see them go between $400 and $550 used and saw a N.O.S (new old-stock) one go for $760 no one wanted mine for $350 when I had it

 

[SloNotch]

http://cgi.ebay.com/ebaymotors/ws/e...STRK:MEWA:IT&viewitem=&item=230214812371&rd=1 I see them go between $400 and $550 used and saw a N.O.S (new old-stock) one go for $760 no one wanted mine for $350 when I had it

No one wanted mine for 350 either.

Whats up with all the trolling in fs threads anyway? just dont post anything and they will get the idea.

 

[375stroker]

the intake is SOLD WAYS!!.I guess the heads are to much too

 

[hangemhigh]

i think i'll go into the pub and introduce MYSELF.:happy:

 

[foxbodydave]

do you have any specs on the springs?? I.E. spring install height, pressure on the seat and open? .650 lift dont mean shit if the spring pressure isnt up to snuff...valve float FTL

 

[375stroker]

150 seat. i have about $3000 in the heads. if the springs arent right, they can be easy changed, either way you look at it. the heads are great deal!!