complete Trick flow intake for 5.0 inj/maf

[Roushy]

I don't know what I want to do with it. It's all there. Regular grey finish intake with hardware . I have an Edelbrock SN95 elbow if needed. Intake will fit fox cars. fuel rails, coolant tube, whatever you need. It's apart now. stock 95 T/B with good electronics still mounted to upper. Ford racing 24# injectors. 10-15k on them over last 3 years. C&L 76mm MAF cal. for 24# with SN95 C&L inlet tube + k&n cone. All together or pick and choose.

together I'll take $500

seperate

TF Intake, upper and lower $350 if you don't need the SN elbow and TB $300

24# Injectors $100

76mm MAF w/elec for 24# $100

C&L Inlet Tube for SN95 $50

 

[1nine84GT]

I just picked up the 24's and the MAF... Thanks Kendal It was a pleasure doing business with you. Thanks again for the Smokin deal.

 

[Roushy]

Intake, elbow and Inlet tube still available.

 

[Roushy]

Intake and Sn95 elbow are still left.

$300 takes it. Has hardware, no searching for crap, just bolt it on.

 

[mystang]

Is the intake an R?

 

[Roushy]

No.

 

[Roushy]

$250 for the intake and hardware. the elbow and T/B are gone.

 

[Roushy]

Last call before Ebay.

It is a Steet heat.