Cleaning the Garage - LS7, Weldon, Weld, Misc Junk, Etc.

[Fryguy302]

Cleaning the Garage - LS7, Weld, Misc, Etc. -UPDATED

Top half of an LS7 engine, SOLD

Global West caster plates for FOX Mustang, old school but work great, $25

(2) Weld Draglite wheels, 15x10, 4.5" backspacing, 5x4.5" bolt pattern, These fit nice on mini-tubbed Mustangs, $175obo

(2) Weld Draglite wheels 15x6 or 7, currently on the front of a g-body, $150obo

Full set of Weld Draglites, powder coated "black chrome (grey)" by QC Coatings, rears are 15x12" with 6.5" backspacing, fronts are 15x3.5. Rears have Hoosier 29.5x10.5w slicks, fronts have no tires on them. Rim screws installed by Harlow or Mcormick, Rear slicks are almost new, ONE pass on them. Stored in basement, $650


Complete harness from 2008 L92 Denali engine, great shape and complete, $100

Complete set of low impedance 83# injectors, may need fresh o-rings, $300 or make offer

WS6/SS F-body power steering cooler $40

Brand New R351 Race block - $950



Pics of everything here:

http://www.detroitracing.net/forums/showthread.php?p=103018&posted=1#post103018

 

[Fryguy302]

Also selling brand new R351 race block:

It's a brand new, never machined R351 block. $950obo

351 SVO SIAMESE BORE, DRY SUMP BLOCK, M-6010-R351*
*(not for use on pollution controlled vehicles)

9.200" Deck height
Cast iron w/ 4 bolt main caps (all 5)
Nodular iron main caps
Can be bored/stroked to produce 427 cu in.
Siamese cylinder bores
Bore range from 4.000-*4.185"
Dry sump oiling design
2.749" main journal diameter
wieghs approx. 190 lbs.
High strength block for professional competition
Semi-finished lifter bores, must be honed to fit

*must be sonic checked when going over 4.125

 

[svtserpent]

pm sent

 

[hangemhigh]

i know what i want.......thanks, raj!

 

[streetracinflint]

Give me a shout on the block 810-444-6441 if u still have it thanks

 

[Fryguy302]

Updated main post

 

[webleedorange619]

The car I bought came with yet more draglites. So now I still have the following draglites left:

(2) 15x12 powder coated, 6.5" bs
(2) 15x3.5 powder coated

(2) 15x10 4.5" bs
(2) 15x12 6" bs
(2) 15x6 or 7, not sure of bs, currently on the front of a g-body.

Make any offer via PM, I might just take it. Will trade also.

I think you may be a weld part owner now with how much inventory you have lol.

 

[Fryguy302]

LS1 Wiring Harness

Updated main post.

 

[Fryguy302]

Updated main post.

 

[TTA]

Need a 4TB storrage server and some cash for the LS7 stuff? ... or laptops I have lots of laptops LOL

 

[Fryguy302]

Trades for the ls7 stuff would have to be totally one sided in my favor :lol: I have more into that stuff than what I'm asking.

Sent from my Droid using Tapatalk

 

[Fryguy302]

Updated main post.

 

[ibmgto]

Still have the LS7 stuff?

Any idea how many miles on it, stock springs?

 

[URDONE4]

yo raj. answer a text. lets swap some cash for that waterpump and my driveshaft lol

 

[chevelledave]

Weld Draglite wheels 15x6 or 7, currently on the front of a g-body, $150obo
can you verify the width ...dual bolt pattern ?? what size tire ...

 

[Fryguy302]

ibmgto: Sorry the LS7 stuff is sold.

Jeff: I'll txt or call this week, been crazy busy lately.

Dave: I'll verify when I can, not sure how I can measure them with tires on them. They are dual bolt pattern. I'll take a better look next time I see the car.

 

[chevelledave]

grab a pic or two ...