Carb help

[Anthony]

Small block Chevy
Th350
Holley 80777 650 dbl pumper

Last night it kept stalling every time I stopped moving, unless I had a foot on the gas at the same time.

It doesn't want to accelerate smoothly till it gets over 180degrees and still then it's a little off.

I know i need a vac can, drums all around, and at speed brakes are really touchy, but at idle pedal is really hard.

I haven't touched at carb in 10 years

Hoping someone local could take a look at it for me. I have no problem throwing them $$

Im I'm in flat rock but can get around

 

[Casper302]

My good friend in Westland does carbs and has for a long time. I'll pm you his .

 

[stroked10]

throw a sv1 on it lol

 

[79cobra]

I've got a guy by your work if that helps

 

[Anthony]

I sent you a txt 79cobra

 

[Scott714]

Quit being lazy you can tune that carb yourself. Get a disc brake conversion while you're at it. Told you brakes and suspension before you know it you'll have 50 grand tied up in this one too. Just busting your balls man.

 

[benk]

My good friend in Westland does carbs and has for a long time. I'll pm you his .

Could you pm me as well.

 

[Billydroveit]

Quit being lazy you can tune that carb yourself. Get a disc brake conversion while you're at it. Told you brakes and suspension before you know it you'll have 50 grand tied up in this one too. Just busting your balls man.

Even ten years ago he sucked at carbs...lol

Get the carb right then address the brake issue, if it's off tune vacuum will suck at idle. Probly needs a good cleaning and rebuild.