BBC guys in here

patman

patman

Club Member
Looking at a camshaft and the only thing I've got is the numbers stamped into the end. They are B30, 636, and CC11-103. It's hydraulic but don't know if it's a stock or aftermarket cam. Anyone know what this is?
 
636 lift b30 is advertised duration IIRC thats a crane lobe number and it is 302 advertised seat to seat. the 11 is the LSA 111 and the 103 is ICL.

Thats all going roughly from memory on the old Crane part number system i would call crane and run those specs by them. If not try Lazer camshafts that could be one of there numbers.
 
Sean said:
636 lift b30 is advertised duration IIRC thats a crane lobe number and it is 302 advertised seat to seat. the 11 is the LSA 111 and the 103 is ICL.

Thats all going roughly from memory on the old Crane part number system i would call crane and run those specs by them. If not try Lazer camshafts that could be one of there numbers.
Click to expand...

thanks Sean.
 
Sean said:
636 lift b30 is advertised duration IIRC thats a crane lobe number and it is 302 advertised seat to seat. the 11 is the LSA 111 and the 103 is ICL.

Thats all going roughly from memory on the old Crane part number system i would call crane and run those specs by them. If not try Lazer camshafts that could be one of there numbers.
Click to expand...

Called Crane and Comp this morning. Neither one could ID the cam. They said that there should be #'s on the rear/gear end. So as soon as I get them I'll post them.
 
You must log in or register to reply here.
Back
Top