Anyone got a set of 15x10 6.5" BS 28x10.50s I can borrow for fitment?

[cjmatt]

Anyone got a set laying around right now I can borrow for a night? I want to put them on and see if Im hitting anywhere, and whatll need to be changed, if anything because of my SN95 axle...

Im ready to order new wheels and tires, just dont wanna drop a ton of money on stuff that wont fit

 

[soap]

If I didn't just sell mine you could have borrowed them. But you will likely need to massage a bit with a BFH to tuck a 6.5" b/s wheel.

--Joe

 

[Fryguy302]

The SN95 rear is wider, you might have clearance issues on the outside. It's a close fit on the outside even with a stock FOX width rear.

PM Saso (Rickety), I think he has some laying around.

 

[cjmatt]

The SN95 rear is wider, you might have clearance issues on the outside. It's a close fit on the outside even with a stock FOX width rear.

PM Saso (Rickety), I think he has some laying around.

Yeah, thats why I wanted to check before ordering. I've got 275/40 ET Streets on 17x8 Cobra wheels on it right now and theyre "just" inside the lip. Ive also got a set of 15x8's with 26's and they fit, but Ive got room behind em and theyre tight up near the fender lip.

Does Saso know the frontspacing on those wheels?:roll:

 

[cjmatt]

bump

 

[MentalMisfit]

Only have 15x10's 6.5 Bs with 325/50's MT drag radials on them. They where real close to the same size as my 28x12.5 Et streets when I compared them side by side though. The drag radials just had more tread but the bulge on the sidewall was about the same.

I don't know about borrowing em for a night but I'm available Saturday or Sunday.

 

[cjmatt]

bump

 

[QuickLX]

Where are you located?

 

[cjmatt]

Where are you located?

work in dearborn, live in royal oak

 

[P.F.M.]

4 or 5 lug?

 

[cjmatt]

4 or 5 lug?

5

thats what has brought up the need. Ive got a 5 lug SN95 axle and am looking for a new set of wheels, but it seems that all the common foxbody sizes wont work with the wider axle. I see alot of fox people run this size, and i think theyll prob stick out on mine, but at least ill be able to measure and see exactly what I need. So far the best I have found has been the new Weld RTS 15x9.275 with 6.5 backspace I just dont want to order them until I know theyll work

 

[11secSVT]

Sent you a pm