aimmotorsports
Forum Member
1991 nissan d21 hardbody
2.4 motor all rebuilt with about 1300 miles on it. new pistons, rings, bearings, rods, cam, water and oil pump. head and crank work done.
fs5w71c 5 speed trans with new clutch, pressure plate, and throw out bearing
tx10 transfer case with stock gears.
roll bar
cb with 3 foot antenna
custom built rear bumper with d rings and hitch
3" body lift
bedlinner and blue paint
solid axle swap with toyota axles
3" toyota lift springs in front with a add-a-leaf in the rear with a 3" block.
spring over axle set-up
4.88 yukon gears. lincoln locked front and rear
rear disk brake conversion
custom built hi-steer with DOM tube and heim joints
custom built trans cross member
everything was custom made just for this truck.
custom offset steel mod wheels 15x8
like new 38.5x15x15 super swamper boggers
m/t classic II wheels, power coated black, 15x10
1.5" aluminum spacers
could clear 40"s without issues
i also have a set of white face gauges that need to be installed. i dont realy want to sell this.
looking for $3800, trying to buy a house this nneds to go.
i also have 5" front springs, spare shafts, 3rd member for the front, axle gussets, shock hoops, mounts, and annother '83 front axle with a '88 rear axle that can be included for annother $800
2.4 motor all rebuilt with about 1300 miles on it. new pistons, rings, bearings, rods, cam, water and oil pump. head and crank work done.
fs5w71c 5 speed trans with new clutch, pressure plate, and throw out bearing
tx10 transfer case with stock gears.
roll bar
cb with 3 foot antenna
custom built rear bumper with d rings and hitch
3" body lift
bedlinner and blue paint
solid axle swap with toyota axles
3" toyota lift springs in front with a add-a-leaf in the rear with a 3" block.
spring over axle set-up
4.88 yukon gears. lincoln locked front and rear
rear disk brake conversion
custom built hi-steer with DOM tube and heim joints
custom built trans cross member
everything was custom made just for this truck.
custom offset steel mod wheels 15x8
like new 38.5x15x15 super swamper boggers
m/t classic II wheels, power coated black, 15x10
1.5" aluminum spacers
could clear 40"s without issues
i also have a set of white face gauges that need to be installed. i dont realy want to sell this.
looking for $3800, trying to buy a house this nneds to go.
i also have 5" front springs, spare shafts, 3rd member for the front, axle gussets, shock hoops, mounts, and annother '83 front axle with a '88 rear axle that can be included for annother $800
