89 mustang gt brake line help

kornfandude

kornfandude

Forum Member
ok well on the bottom master cylinder is missing a line I have no idea where is suppose to go.the driver side caliper doesn't have a line is that where its suppose to go? or does it come out of the proportioning valve? if anyone has a brake line diagram or pics that will help me I would appreciate it.

Sent from my R800x using Tapatalk
 
Front brakes.

The bottomr line goes to one of the front brakes, the other front brake goes into teh rear side of the prop valve. Front of master is the rear brakes and goes to teh front of the prop valve, rear of master is the front brake and goes into the rear of the prop valve.
 
so by what you have just said I assume that the brake line I'm missing should come from the bottom of the master cylinder and go to the driver side caliper

Sent from my R800x using Tapatalk
 
I haven't gotten the time to run the brake line yet.but I hope to get to it tomorrw so I have a dumb question.I haven't ran brake lines before what length of metal line do I need and what else is needed besides the line that comes off the caliper

Sent from my R800x using Tapatalk
 
You must log in or register to reply here.
Back
Top