88 Conquest TSI Built MPI

G54BPOWER

New member
88 WideBody 5 speed,Forged wiseco pistons 20 over,Race preped rods and o ring block and head.All bal and blue printed,Arp crank piston and head bolts,Ported and polish head +1 valves and titainum valve trian,roller rockers,494 lift cam.Magna intake with 750cc injectors and a 70mm throttle body all ported and polished.4 inch intercooler 2 1/2 pipeing,Treadstone manifold ported and polished and the manifold and exhaust housing are ceramic coated and alot of powder coating.Turbo 60-1 70a/r compressure 68a/r exhaust,Stand alone fuel and ignition ecus and 100 shot wet nos kit,Stage 4 clutchmaster clutch and flywheel.Car has 5 miles on all new parts and 120,ooo on body car is very nice.Will need a tune but i do have it turn key.Car also has cross drilled and sloted rotors all suspinson replaced with red poly mounts,Poly trans mount and custom motor mounts and has coil overs.



http://i1044.photobucket.com/albums/b441/FASTG54B/TheBeast006.jpg
 
Last edited:
88 WideBody 5 speed forged wiseco pistons 20 over race preped rods o ring block and head all bal and blue printed arp crank piston and head bolts ported and polish head +1 valves titainum valve trian,roller rockers,494 lift cam magna intake 750cc injectors 70mm throttle body all ported and polished 4 inch intercooler 2 1/2 pipeing treadstone manifold ported and polished manifold and exhaust housing ceramic coated and alot of powder coating with a 60-1 70a/r compressure 68a/r exhaust stand alone fuel and ignition ecus 100 shot wet nos kit stage 4 clutchmaster clutch and flywheel car has 5 miles on all new parts and 120,ooo on body car is very nice needs tuning but i do have it turn key car also has cross drilled and sloted rotors all suspinson replaced red poly mounts poly trans mount custom motor mounts and coil overs.



http://i1044.photobucket.com/albums/...g?t=1287532954

Is this a for sale ad?
 
88 WideBody 5 speed forged wiseco pistons 20 over race prepped rods o ring block and head all balanced and blue printed arp crank piston and head bolts ported and polish head +1 valves titanium valve train,roller rockers,494 lift cam magna intake 750cc injectors 70mm throttle body all ported and polished 4 inch inter cooler 2 1/2 piping treadstone manifold ported and polished manifold and exhaust housing ceramic coated and a lot of powder coating with a 60-1 70a/r compressor 68a/r exhaust stand alone fuel and ignition ecus 100 shot wet nos kit stage 4 clutchmaster clutch and flywheel car has 5 miles on all new parts and 120,000 on body car is very nice needs tuning but i do have it turn key car also has cross drilled and slotted rotors all suspension replaced red poly mounts poly trans mount custom motor mounts and coil overs.



http://i1044.photobucket.com/albums/...g?t=1287532954



LINKY NO WORKY

(Fixed most typos, not grammar though).
 
Its a car forum i am not writing a book,No 1 else says anything so give me a brake and quite co sighing igotaneed4speed thanks.
 
Lol Take it easy. Your new, the grammer police are always around here. All they are saying is your description was hard to read. Dont take it personally this site is full of good guys. Your link doesnt work by the way
 
Yes i am new and the post was from another forum were the car is for sale so thats probably way it came up that way.I am a nice guy to and the link works just go to top left corner and click on my home.
 
Yes i am new and the post was from another forum were the car is for sale so thats probably way it came up that way.I am a nice guy to and the link works just go to top left corner and click on my home.

It works for you, because you're logged into your own photo bucket account. It doesnt work for us, we just see the photobucket login.

Try cutting and pasting the links that begin and end with these
.

By the way, welcome to Motown Muscle.
 
Always liked those cars. How/where do you tune one of those old computers? I ask because I have an old GLH that needs attention and is not as easy to fiddlemwith as these new cars.
 
Back
Top