I have a barely used florida 5.0 gauge cluster for sale. It has the turn signal option installed as well as the high beam indicator light. The gauges are autometer ultralite series gauges with an aem wideband gauge. It comes with everything needed to install, just wire in and run the sensors and your good to go. It does have the adapter for the stock speedo wire to adapt to the back of the autometer gauge. I can sell it without the wideband if you wanted, so you could run an oil pressure gauge and have all the proper gauges to replace the stock cluster. I chose to run it in my center vent gauge cage. I do have a bag of bulb covers so you could change the backlighting to I believe red, blue or green.
The fuel gauge is the correct gauge for the ford ohm's on the sensor in the tank that sends how much fuel is left in the tank. And the water temp gauge is brand new electrical one, it comes with fittings that you can put right into the stock location on the lower intake.
$650obo, Located in Windsor but can cross the border and meet if necessary.
Here is an older picture that show the dash together and it did have the oil pressure gauge in there that I no longer have, but there is a water temp to take its place.
The fuel gauge is the correct gauge for the ford ohm's on the sensor in the tank that sends how much fuel is left in the tank. And the water temp gauge is brand new electrical one, it comes with fittings that you can put right into the stock location on the lower intake.
$650obo, Located in Windsor but can cross the border and meet if necessary.
Here is an older picture that show the dash together and it did have the oil pressure gauge in there that I no longer have, but there is a water temp to take its place.