85 notch real clean for sale or trade?

P

paulmi

Forum Member
:dollar: 85 notch mint body just a few dents no rust , 10pt cage frame tied, rebuilt 306,t5,8.8 with 31spline axles long studs,girdle and auburn posi unit with a 410 gear, engine has - dart windsor sr heads,202 160 stainless valves,rpm intake 750 holley,560 crane roller, bbk full headers, harland sharp roller rockers,msd 6al ,griffin rad , holly blue pump and reg ,an lines,16 gallon cell in the trunk flush mounted with the floor as well as the battery is in the rear under the floor , centerline convo opros all around mickeys all around,tubular kframe ,tubular upper and lower front control arms , coilover shocks, southside machine rear controlarms with lakewood shocks in back with drop zone springs, auto meter gauges monster tach , aluminum driveshaft with loop.hayes clutch with new ford racing cable, fiberglass 3inch cowl hood bolt on aswell as fiber glass trunk lid which bolts on . car runs great sounds real nasty idles well interior has jazz seats,5 pt harness . also flex lite fan , and car has all new wiring front to back . this car was built for nitrous it can handle a 150 shot all day long . currently there is only about 20 MINUTES ON THE ENGINE !!!!!!! i can email pics asking $6000.00 canadien or interesting trade plus cash ( race cart,crotch rocket,mopars)
iam a true dodge guy and would like to find a dart ,duster,demon etc.
1-519-974-7157
 
I bought a car from RM Auctions that was in Canada. It was a PITA to get it across the border. It sat there for about a week while the paperwork cleared.
 
85 mustang

Is this the same car that you had on here just about a month and a half ago.
Was just wondering why the big price increase you were at 4200.00 american and the minimum was 3900.00. Did you do some changes to the car? The reason I ask is I pm'ed you a week or two ago because I was interested in the car. Just let me know that the difference is and I will go from there thanks
 
pics are on the way /changes

changes are i finished the car and purchased other expensive parts as well this car is will be certified you guys in mi dont need a safety . i had to finish the wiring the gauges are in , the car runs now the interior is much more complete and nice even though it has race seats and 10 point cage ! the pro billet msd distributor was $320 alone! some of the increase is my hours and late nights trying to finish wiring and prepping . its hard to explain on the internet but there is no factory wiring in this car and it isnt a painless kit system either its all heavy gauge new winring and harnesses. an easy way is to try to duplicate this car i went through books such as jegs,summit and with out labour it would take double my price just to duplicate the parts ? not even including the car wich is clean and straight so if you dont think this is fair i suggest another car im not being rude its just the last time i offered the car it wasnt complete and not running .
 
ok you can have the car wikdsvt im not doing one more peice of paperwork other then my fucking insurance lol
 
some parts i forgot!

keith black pistons,cloyes chain, studded bl:rockwoot: ock and heads, flaming river manual rack , ac and power steering delete, hayes clutch, quadrant, and ford racing cable , 3inch stainless exaust, flowmaster mufflers, stainless tips,solid tranny and motor mounts, anyone who didnt get pics please tell me and i can get them out soon thanks .
 
pics

some stang pics are below try to get more soon
 

Attachments

  • 100_0312.JPG
    100_0312.JPG
    68.8 KB · Views: 249
  • 100_0315.JPG
    100_0315.JPG
    77.3 KB · Views: 243
  • 100_0316.JPG
    100_0316.JPG
    77.3 KB · Views: 246
  • 100_0318.JPG
    100_0318.JPG
    79 KB · Views: 244
  • 100_0321.JPG
    100_0321.JPG
    63.9 KB · Views: 240
more pics are coming

new pics soryy for size just learning this camera thing?
 

Attachments

  • 100_0308.JPG
    100_0308.JPG
    50.7 KB · Views: 239
  • 100_0310.JPG
    100_0310.JPG
    60 KB · Views: 240
more pics and my truck is for sale too !

truck is a 81 f150 short box stepside with a built 93 302 in it it has 15000 km on the motor documented it has e303 cam edelbrock intake , carb , holley bfuel pump and regulator its a c6 auto and a 9inch rear nice truck 90%rust free few small holes on inside of the box. $2800.00 us
 

Attachments

  • 100_0337.JPG
    100_0337.JPG
    75.7 KB · Views: 236
  • 100_0309.JPG
    100_0309.JPG
    77.3 KB · Views: 234
  • mustang new.jpg small.jpg
    mustang new.jpg small.jpg
    65.8 KB · Views: 233
car and truck both up for grabs will trade mustang ?

will trade or sell stang truck is a cash only deal both have rebuilt 306 s and the truck has about 15,000 km on motor and the stang has about 30 minutes on the motor !!! looking for a dodge car aspen ,dart,duster etc will go up or down with some cash ?/???? 519-974-7157 or [email protected]
 
thanks smooth !!! it is a clean ride !

car is very clean underneath as well , it was sandblasted and painted a while ago this car is 96% rustfree the only thing wrong with the paint is two small dents the size of a silver doller some scuffs and 3 or4 chips there is one scratch about 3inches long by 1/8 inch wide that has some powder rust it comes of with yoiur finger that how light it is ? there is 2 patches in the floor about 5inches by 5 inches thats it the patches were welded over when the cage was put in .
 
paint needed on hood too ?

fiberglass 3inch cowl hood and trunklid will need paint the glasstrunk lid had a spoiler on it and some screw holes need to be filled and one cigerette burn needs to be sanded on the trunk lid too ? car looks good as is but with new paint would be badass !!!!!
 
will trade for dodge a body or turbo dodge?

must be of equal value or i can make up a little differnce?:secret:
 
You must log in or register to reply here.
Back
Top