mustangjoe87
Forum Member
Ill start by saying this boat is quick and if you don't have experience with boats you can get yourself in trouble in a hurry and it may not be for you. That being said its a blast to rip on a early morning with exhaust roaring at 8k but I am looking to get into bigger performance boat so ill be getting rid of my smaller stuff. The boat in parts is worth more than I am asking but id hate to break it up. Here is the craigslist ad description, if you have questions please ask. $5500
17ft Rabco Streaker with a 2.4L Bridgeport Mercury. Motor is a 15in with true offshore setback clamp and fiberglass lift off cowl. Its a ported carb motor with cut heads, light flywheel, intake spacer, and velocity stacks. Lower unit is a 4 hole CLE with a fresh water pump at the end of last year. Center steer 2 person setup, full set of livorsi gauges including trim and jack plate indicators and dual EGT's. Hydraulic steering with Imco side ram and offshore steering plate. Hydraulic set back jack plate. Hull is in good shape but does have some minor gouges and blemishes, it was repainted and clear coated at one time. Sits on a Magic tilt steel trailer with newer surge brakes and aluminum wheels. This boat is a runner and has hit 90mph on gps with some rpm left to go.
17ft Rabco Streaker with a 2.4L Bridgeport Mercury. Motor is a 15in with true offshore setback clamp and fiberglass lift off cowl. Its a ported carb motor with cut heads, light flywheel, intake spacer, and velocity stacks. Lower unit is a 4 hole CLE with a fresh water pump at the end of last year. Center steer 2 person setup, full set of livorsi gauges including trim and jack plate indicators and dual EGT's. Hydraulic steering with Imco side ram and offshore steering plate. Hydraulic set back jack plate. Hull is in good shape but does have some minor gouges and blemishes, it was repainted and clear coated at one time. Sits on a Magic tilt steel trailer with newer surge brakes and aluminum wheels. This boat is a runner and has hit 90mph on gps with some rpm left to go.
Last edited:
