DarkoStoj
A mysterious figure named Darko
I've outgrown my supercharger on my 67 camaro and going to a new setup (fuel injection, high boost,etc).
I'm keeping the intake and pullies, but I spent a lot of time putting together a package that worked very well on my car.
the weiand polished supercharger is a big bore version with just over 1,000 miles on it. It looks like new.
I bought 2 brand holley hp 600 double pumper carburetors. They have been professional modified with adjustable idle feed restrictors, power valve channel restrictors, and transfer slot restrictors. (Those modifications were absolutely needed to have the carbs tuned perfectly for street driving!!) These cost me $1500 alone without the modifications.
http://www.summitracing.com/parts/HLY-0-80575S/
2 dual carb bowl stainless steel -6 fuel lines with stainless an fittings for a fuel feed line and return fuel line/regulator
polished dual carb air filter
I also have other parts for sale:
msd digital 6al-2 programmable ignition
hvc II coil
taylor spark plug wires with looms
mallory magnetic distributor (not unilite)
bg220hr fuel system with bg5000 fuel filter & an lines
aeromotive sumped fuel tank for 67 camaro
small block chevy - sbc - cylinder heads crane cams valve springs, ported, 76cc chamber to lower compression
innovate lc-1 wideband air fuel ratio sensor
autometer phantom 2 5/8 mechanical water temp gauge - full sweep
hedman hustler 1 7/8" ceramic coated headers for first gen f body (1967, 1968, 1969, camaro, firebird, etc)
I'm keeping the intake and pullies, but I spent a lot of time putting together a package that worked very well on my car.
the weiand polished supercharger is a big bore version with just over 1,000 miles on it. It looks like new.
I bought 2 brand holley hp 600 double pumper carburetors. They have been professional modified with adjustable idle feed restrictors, power valve channel restrictors, and transfer slot restrictors. (Those modifications were absolutely needed to have the carbs tuned perfectly for street driving!!) These cost me $1500 alone without the modifications.
http://www.summitracing.com/parts/HLY-0-80575S/
2 dual carb bowl stainless steel -6 fuel lines with stainless an fittings for a fuel feed line and return fuel line/regulator
polished dual carb air filter
I also have other parts for sale:
msd digital 6al-2 programmable ignition
hvc II coil
taylor spark plug wires with looms
mallory magnetic distributor (not unilite)
bg220hr fuel system with bg5000 fuel filter & an lines
aeromotive sumped fuel tank for 67 camaro
small block chevy - sbc - cylinder heads crane cams valve springs, ported, 76cc chamber to lower compression
innovate lc-1 wideband air fuel ratio sensor
autometer phantom 2 5/8 mechanical water temp gauge - full sweep
hedman hustler 1 7/8" ceramic coated headers for first gen f body (1967, 1968, 1969, camaro, firebird, etc)
