5 lug conversion................

[bigg]

on a 87 4 cyl car (mustang), what is the cheapest way to go 5 lug on the front?

i herd use ranger rotors?

tell me what will work

( not my car by the way)

 

[sn95_311]

i thought everyone used sn95 mustang suspension

 

[chuck-norris]

The way my dad did it was he took the axles and plugged all of the wholes and programed the bolt pattern into his shops 5 axis mill and drilled them out ant then turned the od down on a set of ranger rotors to make it fit it was free for him but if you dont have a machine shop at hand maybe mark seven stuff??

 

[outlawdan]

ranger rotors and two drivers side ranger axles.

 

[TWISTED]

^ what he said for the rear and what we used for the front

 

[LITTLEMAGS]

yep...or mark rotors

 

[outlawdan]

mark rotors if you have 87-93 v8 spindles

 

[1nine84GT]

ranger rotors and two drivers side ranger axles.

83-88 4 cylinder rotors. You may have to do a bearing & race swap also but you have the parts coming off the car. Make sure you use the short rear axle from the ranger. I was told That you needed to use the right axle but my sorce may be wrong.