502SS
Forum Member
Dart Lil M block .010 over
Lunati 4" stroke crank
Lunati 6" rods
Diamond pistons (2 new extras) 13:1
Comp custom roller
Brodix -11X heads (minor cleanup)
Super Victor intake
Horsepower Innovations E85 4150 carb
Proform electric water pump
ATI balancer
Stef's oil pan
HVH plate
NOS pro shot nitrous solenoid
Wilson fuel solenoid
NOS purge kit
(3) NOS 10lb bottles
Bottle heater
Nitrous regulator
Coan converter for the above combo
Motor is fairly mild, made right around 670 on motor. Plate is currently jetted at 250. I've got 2 seasons on this setup with no issues. Set the valve lash, change the oil/plugs, and that's about it. This is not a high maintenance motor. Lifters only have 1 season (replaced this year just as normal maintenance. Last set had 5 years on them)
$8,000 for everything. Carb to oil pan, balancer to converter. All nitrous stuff included. Motor is still in the Jeep, and can be heard.
Call or text. 989-600-5691
Lunati 4" stroke crank
Lunati 6" rods
Diamond pistons (2 new extras) 13:1
Comp custom roller
Brodix -11X heads (minor cleanup)
Super Victor intake
Horsepower Innovations E85 4150 carb
Proform electric water pump
ATI balancer
Stef's oil pan
HVH plate
NOS pro shot nitrous solenoid
Wilson fuel solenoid
NOS purge kit
(3) NOS 10lb bottles
Bottle heater
Nitrous regulator
Coan converter for the above combo
Motor is fairly mild, made right around 670 on motor. Plate is currently jetted at 250. I've got 2 seasons on this setup with no issues. Set the valve lash, change the oil/plugs, and that's about it. This is not a high maintenance motor. Lifters only have 1 season (replaced this year just as normal maintenance. Last set had 5 years on them)
$8,000 for everything. Carb to oil pan, balancer to converter. All nitrous stuff included. Motor is still in the Jeep, and can be heard.
Call or text. 989-600-5691